SECO 98012 7.6 m Fiberglass SVR Rod - 0.5 cm Grad

Overview

The SECO 98012 Fiberglass 7.6 m SVR Rod is an extended-length leveling rod designed for construction measurements, elevation work, surveying, and floor-to-ceiling height measurements.

Constructed from strong, rigid fiberglass, the rod features reinforcing ribs for added stability at extended heights. Its rectangular-oval profile provides a wide surface for glare-resistant, wear-resistant graduations in 0.5 cm metric increments.

The rod extends to 7.6 meters and collapses to 58.5 inches for easier transportation. A height scale on the back allows measurements from the floor to a ceiling or overhead surface. The SECO 98012 also includes a 1/4-20 female adapter in the top section and a protective SECO 91411 carrying case.

Key Features

• Extended-length fiberglass SVR leveling rod
• SECO part number: 98012
• Maximum length of 7.6 m
• Graduated in 0.5 cm metric increments
• Rear height scale for floor-to-ceiling measurements
• Shorter 58.5-inch collapsed length
• Lightweight design
• Strong, rigid fiberglass construction
• Reinforcing ribs provide additional stability
• Waterproof construction
• Nonconductive fiberglass body
• Rectangular-oval profile
• Wide, glare-resistant measuring scales
• Wear-resistant graduations
• Tight section-locking mechanism
• Round locking buttons resist jamming from sand and dirt
• 1/4-20 female adapter in the top section
• Includes SECO carrying case
• Included case part number: 91411

Extended 7.6 m Working Length

The SECO 98012 extends to a maximum length of 7.6 meters, providing the additional reach needed for large elevation changes and demanding measurement applications.

Its extended length is useful for deep excavations, structural measurements, roadway work, drainage projects, overhead measurements, and large-scale construction sites.

0.5 cm Metric Graduations

The measuring scale is graduated in 0.5 cm metric increments.

These graduations provide a clear reference for construction leveling, elevation measurements, dimensional checks, and other applications recorded in metric units.

Rear Height Scale

A height scale on the back of the rod allows measurements to be taken upward from a floor or other lower reference surface.

This feature is especially useful for determining:

• Floor-to-ceiling heights
• Overhead clearances
• Interior structural dimensions
• Beam and soffit heights
• Door and opening clearances
• Other vertical dimensions

Strong Fiberglass Construction

The SECO 98012 is manufactured from strong, rigid fiberglass for dependable field performance.

Reinforcing ribs add stability to the rod sections, helping reduce unwanted flex when the rod is extended for long-range elevation and height measurements.

Waterproof and Nonconductive

The fiberglass body is waterproof and resistant to corrosion.

It is also nonconductive, making it a practical alternative to aluminum rods for jobsites where fiberglass measuring equipment is preferred. Proper safety procedures must still be followed around overhead lines, buried utilities, and energized equipment.

Rectangular-Oval Profile

The rectangular-oval shape provides a broad measuring surface while remaining comfortable to grip.

This profile accommodates wide graduations and helps improve the rod’s rigidity and stability when extended.

Glare-Resistant, Wear-Resistant Scales

The wide scales are designed to reduce glare in bright outdoor and indoor lighting conditions.

Their wear-resistant construction helps maintain readability through repeated extension, retraction, transportation, and regular jobsite use.

Dirt-Resistant Locking Buttons

The rod uses a tight locking mechanism with round section buttons.

The rounded design helps resist jamming caused by sand, dirt, and other jobsite debris, supporting reliable section adjustment in demanding field conditions.

Shorter Collapsed Length

The SECO 98012 collapses to 58.5 inches, creating a more manageable transportation and storage size for a rod that extends to 7.6 meters.

Its shorter collapsed configuration makes it easier to carry between measurement points and store in survey vehicles or equipment rooms.

1/4-20 Female Adapter

A 1/4-20 female threaded adapter is integrated into the top section.

This provides a mounting connection for compatible accessories equipped with a 1/4-20 male thread. Accessory fit, weight, and intended application should be verified before use.

Included Carrying Case

The rod includes a protective SECO carrying case:

• SECO part number: 91411

The case helps protect the rod from dirt, abrasion, and accidental damage during transportation and storage.

Ideal Applications

• Construction leveling
• Elevation measurements
• Floor-to-ceiling measurements
• Overhead clearance checks
• Deep excavation measurements
• Road and bridge construction
• Drainage installation
• Structural surveying
• Large-scale site development
• Utility construction
• Engineering fieldwork
• General surveying and layout

Technical Specifications

What’s Included

• 1 × SECO Fiberglass 7.6 m SVR Rod with 0.5 cm Graduations
• SECO p/n: 98012
• 1 × SECO Carrying Case
• Carrying case p/n: 91411
• 1 × Integrated 1/4-20 female adapter

Leveling instrument, tripod, detector, clamp, and other surveying accessories are sold separately.

Extended Metric Rod for Leveling and Height Measurements

The SECO 98012 combines a 7.6-meter working length, 0.5 cm graduations, reinforced fiberglass construction, and a rear floor-to-ceiling height scale. Its nonconductive body, dirt-resistant locks, top adapter, and included carrying case make it a practical choice for demanding survey and construction measurements.