SECO

SECOs Ball-and-Socket X-Grip® features a spring-loaded cradle that expands/contracts to fit your 7-inch tablet
Rubber-coated tips firmly hold your tablet in place
Easy to access grip knobs enable quick-release of your tablet
Connects using the proven RAM ball-and-socket system allowing for multiple positions
Pole clamp and socket link (5200-201) sold separately.
Constructed of marine-grade stainless-steel components and high-strength composite
Fits most 7-inch tablets with or without sleeves, as well as some smaller tablets
Minimum Width 2.25 in (57 mm)
Maximum Width 5.75 in (146 mm)
Depth 0.875 in (22 mm)
Weighs 0.75 lb (0.34 kg)

Features space inside for any standard 12 inch, five-gallon bucket
Orange
Weighs 1.50 lb (0.68 kg) without bucket and approx. 3.85 lb (1.75 kg) with bucket added

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for standard poles or rods with a 0.75 to 1.25 inch OD
Weighs 0.32 lb (0.14 kg)

Center Punch Point fits all poles or products with male 5/8 x 11 threads
Hardened steel point will mark all metal and non-metal surfaces
Weighs 0.20 lb (0.09 kg)

Made of heavy-duty water resistant polyester and Rhinotek™
Measures 27 x 11 x 11 inches (69 x 28 x 28 cm)
Orange
Weighs 1.56 lb (0.71 kg)

This 5-section aluminum leveling rod are made of a light and durable alloy
The telescopic sections are anodized and silk-screened with moisture-resistant ink
Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side
The rod is 16.4 ft length and uses 10ths graduations
Each rod includes a special level and protective bag
Weighs 3.50 lb (1.60 kg)

This 5-section aluminum leveling rod are made of a light and durable alloy
The telescopic sections are anodized and silk-screened with moisture-resistant ink
Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side
The rod is 16.4 ft length and uses 10ths graduations
Each rod includes a special level and protective bag
Weighs 3.50 lb (1.60 kg)

Convenient for adjusting and calibrating pole vials in the office
The adjusting jig features an ‘L-bracket’ to rest the prism pole point on and the adjustable top piece
Use the adjustable top to center your pole before adjusting the bubble
Weighs 1.00 lb (0.45 kg)

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs
The telescopic Aluminum (Round) legs allow for setup
Extends to 65 in (1.65 m)
Features a Quick Clamp lock type with a Triangle/Flat head
Tripod Hardware comes in Orange
Weighs 9.35 lb (4.25 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
Features a 40-minute Vial and Compass built on to the clamp
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.43 lb (0.19 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
Scale width graduated to fill the entire face of the rod,
Measuring scale on the back side that allows for overall height readings
Special molded stand-off ribs protect the scales from wear
Made with strong fiberglass, which is waterproof and corrosion-resistant
CR Rod series is non-conductive
Perfect for laser detector mounting with no special brackets required
Three section rod
Collapsed length is 58.375 inches (1.48 m)
Graduations in 10ths
Length 13 ft
Weighs 5.00 lb (2.26 kg)

The Claw™ is a new and improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it
Made of durable anodized aluminum for years of trouble-free use in the field
These Quick-Release cradles plug directly in to Quick-Release Pole Clamps
Designed for: TSC3
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.46 lb (0.21 kg)

This ‘no-frills’ imported single-section pole is designed to give service in the field at a lower purchase price
Aluminum outer and inner pole
40-minute level vial
Adjustable tip
Dual Grad (0.01 ft/cm)
Hardened steel points
TLV Locking mechanism
Red and White
8.53 ft (2.60 m)
Weighs 2.67 lb (1.21 kg)

This bracket holds a radio antenna securely to a tripod leg
The heavy-duty bracket makes plumbing the antenna easy
Fits all full-size and heavy-duty tripods and uses a 1/2 inch long, 5/8 x 11 male stud to secure the antenna or extension (tripod sold separately)
It can be used with the SECO Six Foot Snap-Lock Radio Antenna Pole (#5139-02) or any extension with a male/female 5/8 x 11 connection
Weighs 1.55 lb (0.70 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Quick-Release cradles plug directly into Quick-Release pole clamps
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
Features a Compass built on to the clamp
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.38 lb (0.17 kg)

Call to place an order

Silver-coated 25 mm prism in a canister
Weighs 0.06 lb (0.03 kg)

The Claw™ is a clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it
Made of durable anodized aluminum for years of trouble-free use in the field
These Quick-Release cradles plug directly in to Quick-Release Pole Clamps
Designed for: Allegro 2, 3 and Surveyor 2
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.46 lb (0.21 kg)

Vests are manufactured to meet ANSI/ISEA Class 2 standards
Features a cool, comfortable mesh back
Includes special compartments for notebooks, pencils, compass, flagging tape, etc
Also includes exterior radio mic clip
100% polyester
Weighs 1.31 lb (0.59 kg)

This tripod is ideal for use with poles under 24 inches long 1-to-1.5 inch (25.4-to-38.1 mm) diameter poles thread easily through the open clamp on top
Legs are a fixed length of 12 inches each
Include stainless steel clamp screw and rubber tips
Weighs 1.30 lb (0.6 kg)

Comes with no-crush bipod head, which prevents crushing of carbon fiber range or prism poles even when excess force is used
A surveyor can set up a freestanding GPS antenna pole or prism pole 1-to-1.25-inch (25.4-to-31.8 mm) OD
Poles attach easily through the open clamp 1.5 inch (3.81 cm) OD poles can be loaded through the top
The legs (independently) extend to 6 feet (1.8 m) and collapse to 43 inches (109 cm)
Comes with bag and leg clip for easy transport
Construction Series
Weighs 4.25 lb (1.93 kg)