SECO

Hardened steel replacement point for most SECO tripods and prism pole points
Weighs 0.06 lb (0.03 kg)

The plumb bob point is a replacement part
Fits any of the SECO plumb bobs

The TopoBoot®, made of black nylon, screws over the precision point and increases the area of the point for use on soft surfaces in topo shots
The Topo-Boot is removable and stores conveniently under the large, easy-to read vial
Weighs 0.05 lb (0.02 kg)

The heavy-duty leather sheath is double stitched top grain leather with a belt loop
Options ranging from 10 to 32 OZ

Crain’s Stedi-Rest® fits any 1.25 to 1.5 inch (32 to 38.1 mm) pole and can take the place of three separate products, level Vial Adjustment Jig, Prism Pole Bipod and a Rod Rest
Weighs 0.15 lb (0.07 kg)

Tape made from epoxy paint coated steel
Features a rubberized black and high visibility yellow case with a positive thumb lock and release action
Graduations in 10ths / Metric / Inch
Length: 25 ft

Durable removable-tip scribers are perfect for making quick and accurate marks on hard work pieces
Works well on metal, ceramic, concrete, stone, lumber or other surfaces
The scriber features a durable tungsten carbide point that is able to make precise marks to 1/100th of an inch
The magnetic cap quickly cleans up stray metal shavings
Weighs 0.05 lb (0.02 kg)

This spray can holder is constructed of heavy-duty nylon Cordura® and a nylon webbing belt loop
Holds a paint can on hip for easy and convenient access
Orange
Weighs 0.14 lb (0.06 kg)

This rubber ball is used as a pin cushion for holding stake tacks
Built-in belt loop

Features an anodized aluminum body
Easy-to-replace steel point, PN 5194-003
Sharp Point
Weighs 0.16 lb (0.07 kg)

The bipod leg clip easily attaches to the base of any 1.25 inch O.D. prism or antenna pole
The bipod legs snap into the clip making the system convenient for transport or storage
Weighs 0.04 lb (0.02 kg)

40-minute vial
Includes screws
Weighs 0.03 lb (0.01 kg)

Constructed from anodized aluminum and adapts 5/8 x 11 tripod to 1/4 x 20
Weighs 0.20 lb (0.09 kg)

The Rhino Ruler outlasts wood rulers four to one with a waterproof fiberglass construction prevents common problems that occur with wood rulers such as fading, splintering, and chipping
Engraved (Tenths/Inches) graduations resist weather and scratches
Easy-to-fold locking joints are tighter than traditional folding rulers made of wood allowing for a more accurate measurement along the ruler’s length
Weighs 0.40 lb (0.18 kg)

3.37 inch (85.6 mm) aluminum body
Removable point
Weighs 0.10 lb (0.05 kg)

Features a die-cast aluminum body and an adjustable vial
Fits round or rectangular rods
Suitable for use with track light, robotic instruments, or conventional leveling
The snap-on level fits all poles with a 1 to 1.25 inch diameter
Feature a 40 minute sensitivity
Weighs 0.10 lb (0.04 kg)

Use the Ball-and-Socket Link for your custom solution
Fits the 1-inch ram ball on cradles and clamps
Weighs 0.27 lb (0.12 kg)

3.37 inch steel body, removable point
Weighs 0.30 lb (0.14 kg)

8-minute vial
Includes screws
Weighs 0.03 lb (0.01 kg)

3.37 inch steel body, steel body
Weighs 0.30 lb (0.14 kg)