Fiberglass pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections 20 cm in Length 1.25 in (32 mm) Outside Diameter Weighs 0.34 lb (0.15 kg)
These aluminum leveling rods are made of a light and durable alloy The telescopic sections are anodized and silk-screened with moisture-resistant ink Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side These rods are 3-Sections and come in 10ths graduations Length 9 ft Each rod includes a special level and protective bag Weighs 2.40 lb (1.10 kg)
This case fits most large controllers like the Ranger™ series, Allegro, TSC2™, etc The case is padded with 0.25 in 1000D Cordura® material with khaki trim Features a Velcro® flap closure, belt loop and shoulder strap The main compartment of the case measures 10.25 x 5.25 x 2 in (26 x 13.3 x 5 cm) The outside pocket is 6 x 5 in (15 x 12.7 cm) Orange Weighs 0.35 lb (0.16 kg)
This rotating friction top tribrach adapter allows the prism to be pointed after installation in the tribrach Fits all tribrachs Weighs 0.9 lb (0.41 kg)
The open clamp attachment allows quick and easy connection to the pole; it connects to 1 to 1.25 inch (25.4 to 31.8 mm) OD poles The brass male 5/8 x 11 captive stud is easily removed for direct attachment of the radio antenna to the bar Comes with a non-slip Velcro® cable strap to help manage the radio cable Can be used with the Radio Antenna Adapter 2133-00 which adapts 1-1/8 x 18 radio antennas to any 5/8 x 11 threaded tip (sold separately) Weighs 0.22 lb (0.10 kg)
This system holds a GPS or RTK-type rod to the door of your survey truck for a mobile solution and off-road surveys Easy to set up and fits most mid- to full-size pickups and SUVs, kit available for Ford F-Series, PN 5114-21-054 Open and close the doors, roll the windows up and down, all normal door functions are preserved Flo Orange Weighs 6.20 lb (2.80 kg)
The Carbon Fiber pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections 1.25 inch (32 mm) outside diameter 50 cm in length Weighs 0.50 lb (0.23 kg)
Heavy-Duty Lath Bag with Rhinotek material on the bottom and six inches up the sides Designed 48 inches (1.2 m) deep Orange Weighs approximately 1.50 lb (0.68 kg)
These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs Features a Quick Clamp and a Triangle/Flat head Tripod Head Size: 12cm, +,-2mm from flat side to opposite corner The telescopic Aluminum (Round) legs allow for setup to extend to 63.5 in (1.60 m) Hardware is Black only Weighs 7.45 lb (3.38 kg)
The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Cradle: Designed for Leica RX Series, C-10/C-15 Weighs 0.35 lb (0.16 kg)
The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Quick-Release cradles plug directly into Quick-Release Pole Clamps Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Small image shows claw attached to cradle. Cradle not included.
The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Designed for standard 1.25 inch OD rods and poles Includes Quick Release and Battery Slot Weighs 0.46 lb (0.21 kg)
The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Designed for larger 1.5 inch OD rods and poles Weighs 0.35 lb (0.16 kg)
These Claw™ clamps are also made of durable anodized aluminum The Claw technology allows maximum tightening on the pole without crushing The Ball-and-Socket versions allow a handheld data collector to be in more positions Customize your own solution with these components The clamps are designed to fit a pole diameter of 1.25 inch (32 mm) Ball-and-Socket Cradle (1-inch ram ball, designed for 1.25 inch OD poles) Plain with 1 inch Ball Weighs 0.31 lb (0.14 kg)
$93.95
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Find out more here.