Prism Poles

Features dual graduations, an adjustable tip that will adjust to a prism height of 65 mm-to-115 mm
TLV™ Lock
Carbon fiber poles are approximately 30% lighter than similar aluminum poles
Extends 8.53 ft (2.60 m) and collapses to 4.97 ft (1.51 m)
Weighs 2.30 lb (1.05 kg)

This ‘no-frills’ imported single-section pole is designed to give service in the field at a lower purchase price
Aluminum outer and inner pole
40-minute level vial
Adjustable tip
Dual Grad (0.01 ft/cm)
Hardened steel points
TLV Locking mechanism
Red and White
8.53 ft (2.60 m)
Weighs 2.67 lb (1.21 kg)

This ‘no-frills’ imported two-section pole is designed to give service in the field at a lower purchase price
Aluminum outer and inner pole
40-minute level vial
Adjustable Tip
Dual Grad (0.01 ft/cm)
Hardened steel points
TLV lock mechanism
Red and White
11.81 ft (3.60 m)
Weighs 3.65 lb (1.66 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
Scale width graduated to fill the entire face of the rod,
Measuring scale on the back side that allows for overall height readings
Special molded stand-off ribs protect the scales from wear
Made with strong fiberglass, which is waterproof and corrosion-resistant
CR Rod series is non-conductive
Perfect for laser detector mounting with no special brackets required
Four section rod
Collapsed length is 56.75 inches (1.44 m)
Graduations in 10ths
Length 16 ft
Weighs 6.00 lb (2.72 kg)

This 12.2 mm OD pin pole features three sections – each 60 cm long to achieve 1.8 m (5.91 ft); each color section (red or white) is 10 cm long
Weighs 1.95 lb (0.9 kg)

Hardened steel replacement point for most SECO tripods and prism pole points
Weighs 0.06 lb (0.03 kg)

Any of the Quick Change™ poles can be used for GPS, robotic or total station surveys
Features include SECO TLV™ locking mechanism including a 40-minute vial built in
Aluminum outer pole
Metric graduation (cm) inner pole
Does not come with locking pin
Red and White
Length is 1.33 m – 2.20 m
SECO 6400 Series  (#2090-12) adapter included
Weighs 2.70 lb (1.22 kg)

3.37 inch (85.6 mm) aluminum body
Weighs 0.34 lb (0.15 kg

This ‘no-frills’ imported three-section pole is designed to give service in the field at a lower purchase price
Aluminum outer and inner pole
40-minute level vial
Adjustable tip
Dual Grad (0.01 ft/cm)
Hardened steel points
Twist-Lock mechanism
Red and White
15.25 ft (4.65 m)
Weighs 5.38 lb (2.44 kg)

Features a die-cast aluminum body and an adjustable vial
Fits round or rectangular rods
Suitable for use with track light, robotic instruments, or conventional leveling
The snap-on level fits all poles with a 1 to 1.25 inch diameter
Feature a 40 minute sensitivity
Weighs 0.10 lb (0.04 kg)

40-minute level vial is located on the lock, away from the instruments on the pole
The Quick-Release locking mechanism features adjustable tension via a set screw in the handle and another set screw to assist in keeping the spring in position
Simple and fast setup
One-section pole
Dual Grad (10ths/cm)
Adjustable Tip
Powder-coated and silk screened aluminum
Red and White
8.53 ft (2.60 m) extended, 4.97 ft (1.52 m) closed
Weighs 3.30 lb (1.50 kg)

Mount a standard survey prism to your SVR or CR Grade Rod
5/8 x 11 thread with 1/4 x 20 stainless tip
Weighs 0.15 lb (0.07 kg)