SECO

8-minute vial
Includes bearing and screws
Weighs 0.03 lb (0.01 kg)

8-minute vial
Includes screws
Weighs 0.03 lb (0.01 kg)

40-minute vial
Includes screws
Weighs 0.03 lb (0.01 kg)

Features a new shorter collapsed length and a lighter weight
Constructed of strong, rigid fiberglass with reinforcing ribs for added stability
Waterproof and nonconductive
The rectangular-oval shape allows for wide, glare resistant scales that are wear-resistant
Tight locking mechanism features round buttons that resist jamming from sand and dirt
Features a 1/4 x 20 female adapter in top section
Graduations 10ths
Length 17 ft
Includes carrying case (#91411)
Weighs 5.00 lb (2.27 kg)

Features a new shorter collapsed length (58.5 inches and a lighter weight
Constructed of strong, rigid fiberglass with reinforcing ribs for added stability
Waterproof and nonconductive
The rectangular-oval shape allows for wide, glare resistant scales that are wear-resistant
Tight locking mechanism features round buttons that resist jamming from sand and dirt
Features a 1/4 x 20 female adapter in top section
Graduations ‘E’ metric
Includes carrying case (#91411)
Length 7.6 m
Weighs 6.00 lb (2.72 kg)

Features a new shorter collapsed length 58.5 inches and a lighter weight
Constructed of strong, rigid fiberglass with reinforcing ribs for added stability
Waterproof and nonconductive
The rectangular-oval shape allows for wide, glare resistant scales that are wear-resistant
Tight locking mechanism features round buttons that resist jamming from sand and dirt
Features a 1/4 x 20 female adapter in top section
Graduations 0.5 cm metric
Features a Height Scale on the back, to measure from the floor up to the ceiling
Includes carrying case (#91411)
Length 7.6 m
Weighs 6.00 lb (2.72 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
Scale width graduated to fill the entire face of the rod,
Measuring scale on the back side that allows for overall height readings
Special molded stand-off ribs protect the scales from wear
Made with strong fiberglass, which is waterproof and corrosion-resistant
CR Rod series is non-conductive
Perfect for laser detector mounting with no special brackets required
Three section rod
Collapsed length is 58.375 inches (1.48 m)
Graduations in 10ths
Length 13 ft
Weighs 5.00 lb (2.26 kg)

Crain’s Stedi-Rest® fits any 1.25 to 1.5 inch (32 to 38.1 mm) pole and can take the place of three separate products, level Vial Adjustment Jig, Prism Pole Bipod and a Rod Rest
Weighs 0.15 lb (0.07 kg)

The TopoBoot®, made of black nylon, screws over the precision point and increases the area of the point for use on soft surfaces in topo shots
The Topo-Boot is removable and stores conveniently under the large, easy-to read vial
Weighs 0.05 lb (0.02 kg)

Durable removable-tip scribers are perfect for making quick and accurate marks on hard work pieces
Works well on metal, ceramic, concrete, stone, lumber or other surfaces
The scriber features a durable tungsten carbide point that is able to make precise marks to 1/100th of an inch
The magnetic cap quickly cleans up stray metal shavings
Weighs 0.05 lb (0.02 kg)

Lightweight aluminum center punches are great for marking a variety of materials or punching starter holes for nails or drill bits
Works well on metal, ceramic, concrete, stone, lumber or other surfaces
The magnetic cap quickly cleans up stray metal shavings
Weighs 0.13 lb (0.06 kg)

6-5/8-inch flat head with large center hole (2-5/8-inch) to facilitate an easy set-up over a point
Foot is equipped with a replaceable point made of hardened steel
Dual Locks (Quick Clamp and Screw Clamp)
Standard 5/8 x 11 threaded brass instrument stud
Yellow fiberglass legs, orange aluminum hardware
Snap cap to protect tripod head
Comes with shoulder strap for comfortable carrying over longer distances
Made in North America under strict quality controls
Extends 70.75 inches (179 cm)
Collapses 43.75 inches (111 cm)
Weighs 13.60 lb (6.16 kg)

The Tri-Max®, designed and manufactured by SECO, is the only surveying grade tripod with certified accuracy
Highly recommended for all servo driven and robotic total stations, 3-D laser scanners or construction lasers
The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use
The large foot is designed specifically for surveyors who have asked for wide, angled tabs to allow even muddy boots to have a secure grip when setting up
The Tri-Max can handle equipment up to 65 lb (30 kg)
Dual Clamp Lock type
Black Hardware, Sealed Hardwood Legs
Length Extended: 71 inches (183 cm)
Length Collapsed: 45 inches (114 cm)
Weight: 19.65 lb (8.9 kg)

The Tri-Max® is the only surveying grade tripod with certified accuracy – highly recommended for all servo driven and robotic total stations, 3-D laser scanners or construction lasers
The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use
Features a 6-5/8-inch Flat head with large center hole (2-5/8 inch) to facilitate an easy set-up over a point
A retaining system which prevents leg kick out and accidental falls on slick surfaces is stored on the inside of the leg and can be left in place when the tripod is not in use
The Tri-Max can handle equipment up to 65 lb (30 kg)
Dual Clamp Lock type
Black Hardware, Fiberglass Legs
Extends 71 in (1.8 m)
Collapses 44.5 in (113 cm)
Weighs 17.00 lb (7.70 kg)

The LR Series leveling rods are round and easy to handle
The LR-PRO is larger in diameter so sturdier and easier to read
35 ft length
Graduations feet/10ths/100ths
Includes carrying case (replacement can be purchased here #91402)
Outside Diameter is 2-3/16 inch
Weighs 9.00 lb (4.08 kg)

The LR Series leveling rods are round and easy to handle
The LR-PRO is larger in diameter so sturdier and easier to read
25 ft
Graduations feet/10ths/100ths
Includes carrying case (replacement can be purchased here #91402)
Outside Diameter is 2 inches
Weighs 7.00 lb (3.17 kg)

This case fits most large controllers like the Ranger™ series, Allegro, TSC2™, etc
The case is padded with 0.25 in 1000D Cordura® material with khaki trim
Features a Velcro® flap closure, belt loop and shoulder strap
The main compartment of the case measures 10.25 x 5.25 x 2 in (26 x 13.3 x 5 cm)
The outside pocket is 6 x 5 in (15 x 12.7 cm)
Orange
Weighs 0.35 lb (0.16 kg)

Spacious & Organized: Double-zipped top-loading compartment, side pockets, and front battery pocket for ample storage and organization.
Weather-Resistant Design: Top rain flap, side pocket rain flaps protect equipment from rain and moisture.
Sturdy & Stable: Free-standing aluminum frame keeps the backpack upright, even when fully loaded.
Comfortable & Adjustable: Padded belt, shoulder straps with all-point adjustment, and rubberized carrying handle for a customized and comfortable fit.
Generous Dimensions: Interior dimensions of 17x10x10in, exterior dimensions of 24.5x15x16in, weighing only 8.00lb.
Vibrant Orange Color: High visibility for easy identification in the field.

Designed for vertical triple prism assemblies
Measures: 15 x 8 x 2 in (38.1 x 20.3 x 5.1 cm)*
Orange
Weighs 1.45 lb (0.66 kg)

Made of heavy-duty water resistant polyester and Rhinotek™
Measures 27 x 11 x 11 inches (69 x 28 x 28 cm)
Orange
Weighs 1.56 lb (0.71 kg)