Level Rods

Use the SECO Leveling Plate to improve the accuracy of level runs in soft terrain
The Leveling Plates (or Turtles as they are commonly known) are cast heavy steel and red powder painted for durability
Other quality construction features include chrome plating on the dome, carrying handle and ground points
Diameter – 14 cm
Diameter of half ball – 3.0 cm
Height of half ball – 2.0 cm
Height of foot to top of half ball – 6.6 cm
Red
Weighs 4.41 lb (2.00 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
Scale width graduated to fill the entire face of the rod,
Measuring scale on the back side that allows for overall height readings
Special molded stand-off ribs protect the scales from wear
Made with strong fiberglass, which is waterproof and corrosion-resistant
CR Rod series is non-conductive
Perfect for laser detector mounting with no special brackets required
Three section rod
Collapsed length is 58.375 inches (1.48 m)
Graduations in inches
Length 13 ft
Weighs 5.00 lb (2.26 kg)

This 5-section aluminum leveling rod are made of a light and durable alloy
The telescopic sections are anodized and silk-screened with moisture-resistant ink
Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side
The rod is 16.4 ft length and uses 10ths graduations
Each rod includes a special level and protective bag
Weighs 3.50 lb (1.60 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
Scale width graduated to fill the entire face of the rod,
Measuring scale on the back side that allows for overall height readings
Special molded stand-off ribs protect the scales from wear
Made with strong fiberglass, which is waterproof and corrosion-resistant
CR Rod series is non-conductive
Perfect for laser detector mounting with no special brackets required
Three section rod
Collapsed length is 58.375 inches (1.48 m)
Graduations in 10ths
Length 13 ft
Weighs 5.00 lb (2.26 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
Scale width graduated to fill the entire face of the rod,
Measuring scale on the back side that allows for overall height readings
Special molded stand-off ribs protect the scales from wear
Made with strong fiberglass, which is waterproof and corrosion-resistant
CR Rod series is non-conductive
Perfect for laser detector mounting with no special brackets required
Four section rod
Collapsed length is 56.75 inches (1.44 m)
Graduations in 10ths
Length 16 ft
Weighs 6.00 lb (2.72 kg)

Non-conductive lightweight fiberglass leveling rods
Waterproof and corrosion-proof even against seawater
Unique patented oval shape permits equal size graduations full-length, prevents rod from rolling and is easier to hold
Numeral and graduations are epoxy-protected for maximum wear-resistance and sized for maximum readability
The Level Rod Sections are cushioned with glides to prevent wear
Height measuring gauge on the back side
5/8 x 11 female thread for prism attachment
25 ft length
Graduations 10ths
Includes carrying bag
Weighs 4.8 lb (2.18 kg)

Features a new shorter collapsed length and a lighter weight
Constructed of strong, rigid fiberglass with reinforcing ribs for added stability
Waterproof and nonconductive
The rectangular-oval shape allows for wide, glare resistant scales that are wear-resistant
Tight locking mechanism features round buttons that resist jamming from sand and dirt
Features a 1/4 x 20 female adapter in top section
Graduations 10ths
Length 17 ft
Includes carrying case (#91411)
Weighs 5.00 lb (2.27 kg)

Features a new shorter collapsed length (58.5 inches and a lighter weight
Constructed of strong, rigid fiberglass with reinforcing ribs for added stability
Waterproof and nonconductive
The rectangular-oval shape allows for wide, glare resistant scales that are wear-resistant
Tight locking mechanism features round buttons that resist jamming from sand and dirt
Features a 1/4 x 20 female adapter in top section
Graduations ‘E’ metric
Includes carrying case (#91411)
Length 7.6 m
Weighs 6.00 lb (2.72 kg)

Features a new shorter collapsed length 58.5 inches and a lighter weight
Constructed of strong, rigid fiberglass with reinforcing ribs for added stability
Waterproof and nonconductive
The rectangular-oval shape allows for wide, glare resistant scales that are wear-resistant
Tight locking mechanism features round buttons that resist jamming from sand and dirt
Features a 1/4 x 20 female adapter in top section
Graduations 0.5 cm metric
Features a Height Scale on the back, to measure from the floor up to the ceiling
Includes carrying case (#91411)
Length 7.6 m
Weighs 6.00 lb (2.72 kg)

Features a new shorter collapsed length 58.5 inches and a lighter weight
Constructed of strong, rigid fiberglass with reinforcing ribs for added stability
Waterproof and nonconductive
The rectangular-oval shape allows for wide, glare resistant scales that are wear-resistant
Tight locking mechanism features round buttons that resist jamming from sand and dirt
Features a 1/4 x 20 female adapter in top section
Graduations 10ths
Includes carrying case (#91411)
Length 25 ft
Weighs 6.00 lb (2.72 kg)

The LR Series leveling rods are round and easy to handle
The LR-PRO is larger in diameter so sturdier and easier to read
25 ft
Graduations feet/10ths/100ths
Includes carrying case (replacement can be purchased here #91402)
Outside Diameter is 2 inches
Weighs 7.00 lb (3.17 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
Scale width graduated to fill the entire face of the rod,
Measuring scale on the back side that allows for overall height readings
Special molded stand-off ribs protect the scales from wear
Made with strong fiberglass, which is waterproof and corrosion-resistant
CR Rod series is non-conductive
Perfect for laser detector mounting with no special brackets required
Two section rod
Collapsed length is 52 inches (1.32 m)
Graduations in inches
Length 8 ft
Weighs 3.00 lb (1.36 kg

This 5-section aluminum leveling rod are made of a light and durable alloy
The telescopic sections are anodized and silk-screened with moisture-resistant ink
Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side
The rod is 16.4 ft length and uses 10ths graduations
Each rod includes a special level and protective bag
Weighs 3.50 lb (1.60 kg)

The LR Series leveling rods are round and easy to handle
The LR-PRO is larger in diameter so sturdier and easier to read
35 ft length
Graduations feet/10ths/100ths
Includes carrying case (replacement can be purchased here #91402)
Outside Diameter is 2-3/16 inch
Weighs 9.00 lb (4.08 kg)

Rugged, versatile, and lightweight
Bold numbers and easy-to-distinguish cut/fill portions
DuPont nylon parts, heavy-duty matte tape, and U.V. stabilized detector rails
Direct reading (true elevation) eliminates errors caused by adding or subtracting
Faster grade shots than conventional style rods
Special rail slide for faster and easier readings

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
Scale width graduated to fill the entire face of the rod,
Measuring scale on the back side that allows for overall height readings
Special molded stand-off ribs protect the scales from wear
Made with strong fiberglass, which is waterproof and corrosion-resistant
CR Rod series is non-conductive
Perfect for laser detector mounting with no special brackets required\
Two section rod
Collapsed length is 52 inches (1.32 m)
Graduations in 10ths
Length 8 ft
Weighs 3.00 lb (1.36 kg)

These aluminum leveling rods are made of a light and durable alloy
The telescopic sections are anodized and silk-screened with moisture-resistant ink
Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side
These rods are 3-Sections and come in 10ths graduations
Length 9 ft
Each rod includes a special level and protective bag
Weighs 2.40 lb (1.10 kg)

Call to place an order

Unique patented oval shape permits equal size graduations full-length, prevents rod from rolling and is easier to hold.
Numerals and graduations are epoxy-protected for maximum wear-resistance and sized for maximum readability.
Sections cushioned with glides to prevent wear.
Linear accuracy exceeds 1 in 4,000.
Made from strong, corrosion-proof fiberglass that is lightweight and won't warp or swell.
Rods have height measuring gauge on back side
Female threaded hole (5/8 x 11 in.) on top for mini-prism