SECO Adapters, Brackets, Cradles

Hardened steel replacement point for most SECO tripods and prism pole points
Weighs 0.06 lb (0.03 kg)

The TopoBoot®, made of black nylon, screws over the precision point and increases the area of the point for use on soft surfaces in topo shots
The Topo-Boot is removable and stores conveniently under the large, easy-to read vial
Weighs 0.05 lb (0.02 kg)

Crain’s Stedi-Rest® fits any 1.25 to 1.5 inch (32 to 38.1 mm) pole and can take the place of three separate products, level Vial Adjustment Jig, Prism Pole Bipod and a Rod Rest
Weighs 0.15 lb (0.07 kg)

Features an anodized aluminum body
Easy-to-replace steel point, PN 5194-003
Sharp Point
Weighs 0.16 lb (0.07 kg)

The bipod leg clip easily attaches to the base of any 1.25 inch O.D. prism or antenna pole
The bipod legs snap into the clip making the system convenient for transport or storage
Weighs 0.04 lb (0.02 kg)

3.37 inch steel body, steel body
Weighs 0.30 lb (0.14 kg)

Features a die-cast aluminum body and an adjustable vial
Fits round or rectangular rods
Suitable for use with track light, robotic instruments, or conventional leveling
The snap-on level fits all poles with a 1 to 1.25 inch diameter
Feature a 40 minute sensitivity
Weighs 0.10 lb (0.04 kg)

3.37 inch steel body, removable point
Weighs 0.30 lb (0.14 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
For: Leica GPH1
Target Height: 86 mm
Length: 50 mm
Weighs 0.19 lb (0.09 kg)

Adapts Swiss-style snap-on prisms to 5/8 x 11 tribrach adapter or prism pole
Weighs 0.06 lb (0.03 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Topcon users with 77 mm prism
Weighs 0.14 lb (0.06 kg)

Use the Ball-and-Socket Link for your custom solution
Fits the 1-inch ram ball on cradles and clamps
Weighs 0.27 lb (0.12 kg)

Features 5/8-11 Female to 1/4-20 Male
Weighs 0.17 lb (0.08 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Users with  SECO, Sokkia, Omni 115 mm prism
Weighs 0.06 lb (0.03 kg)

This anodized aluminum adapter features female 5/8 x 11 threads
Weighs 0.05 lb (0.02 kg)

Constructed from anodized aluminum and adapts 5/8 x 11 tripod to 1/4 x 20
Weighs 0.20 lb (0.09 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
For: Leica Adjustable
Target Height: 86 mm to 125 mm
Weighs 0.34 lb (0.15 kg)

This new laser detector adapter turns any Quick Change Pole into a laser grade rod
Use it for digging footings and measuring elevations
Works with the standard detector rod clamp that comes with the detector
The azimuth is adjustable to orient the detector toward the laser so reading the graduations is easy
Machined anodized-aluminum for superior strength and weight concerns
Height: 150 mm
Weighs 0.60 lb (0.27 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Leica users w/ 86 mm prism
Weighs 0.11 lb (0.05 kg)

Fiberglass pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections
20 cm in Length
1.25 in (32 mm) Outside Diameter
Weighs 0.34 lb (0.15 kg)