For Comfortable Observations Of Steep Sights, Up To The Zenith Includes Objective Counterweight Works Well w/ the FlexLine & TS06plus/TS09plus Fits All TPS Instruments. Enhances Optics of Total Station
BNC-to-BNC Cable: High-quality BNC-to-BNC cables are essential for connecting your TDR Network Analyzer to the cable under test. These cables should be impedance-matched to the cable under test to ensure accurate results. BNC-to-Alligator Clip Cable: BNC-to-alligator clip cables provide a convenient way to connect your TDR Network Analyzer to test points on the cable under test. BNC-to-F-type Adapter: BNC-to-F-type adapters allow you to connect your TDR Network Analyzer to coaxial cables with F-type connectors. These adapters are essential for testing coaxial cables. USBA-USBA Cable: USBA-USBA cables are used to connect your TDR Network Analyzer to a PC. This allows you to transfer data from the TDR to the PC for analysis and reporting.
Instant, mobile 3D scanning of rooms, spaces, equipment, and more Highly accurate point cloud data sets comparable to larger-scale 3D scanning devices Real-time 3D reconstruction with live quality feedback Local data optimization (post-processing) for highly accurate results Automatic AprilTag targeting for intelligent accuracy improvement Precise, savable measurements of distance, area, volume, and more
Crain’s Stedi-Rest® fits any 1.25 to 1.5 inch (32 to 38.1 mm) pole and can take the place of three separate products, level Vial Adjustment Jig, Prism Pole Bipod and a Rod Rest Weighs 0.15 lb (0.07 kg)
Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm For: Leica GPH1 Target Height: 86 mm Length: 50 mm Weighs 0.19 lb (0.09 kg)
5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms For Topcon users with 77 mm prism Weighs 0.14 lb (0.06 kg)
5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms For Users with SECO, Sokkia, Omni 115 mm prism Weighs 0.06 lb (0.03 kg)
For adapting Leica snap-on prisms to 5/8 x 11 tribrach adapter or prism pole Stainless Steel body Great for job sites near salt water Weighs 0.16 lb (0.07 kg)
Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm For: Adjustable 5/8 x 11 Target Height: 50 mm to 115 mm Weighs 0.29 lb (0.13 kg)
$36.90
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Find out more here.