SECO

Developed in conjunction with surveyors from the California DOT
Meets ANSI/ISEA Class 2 requirements
Features include bright fluorescent material, 4-inch (10.16 cm) wide contrasting reflective material with 2-inch (5.08 cm) wide silver stripes made of 3M™ Scotchlite™ reflective material
Made of durable polyester, brass grommets, heavy-duty webbing and trim, and a genuine YKK™ zipper
Adaptive Comfort® material by Outlast®, a Certified Space Technology™, designed to balance body temperature
Features four large pockets on the outside and two generous pockets on the inside — great for field books, tapes, pencils, flagging, cell phones
Includes two spray can holders

Spacious & Organized: Double-zipped top-loading compartment, side pockets, and front battery pocket for ample storage and organization.
Weather-Resistant Design: Top rain flap, side pocket rain flaps protect equipment from rain and moisture.
Sturdy & Stable: Free-standing aluminum frame keeps the backpack upright, even when fully loaded.
Comfortable & Adjustable: Padded belt, shoulder straps with all-point adjustment, and rubberized carrying handle for a customized and comfortable fit.
Generous Dimensions: Interior dimensions of 17x10x10in, exterior dimensions of 24.5x15x16in, weighing only 8.00lb.
Vibrant Orange Color: High visibility for easy identification in the field.

Features dual graduations, an adjustable tip that will adjust to a prism height of 65 mm-to-115 mm
TLV™ Lock
Carbon fiber poles are approximately 30% lighter than similar aluminum poles
Extends 8.53 ft (2.60 m) and collapses to 4.97 ft (1.51 m)
Weighs 2.30 lb (1.05 kg)

Hardened steel replacement point for most SECO tripods and prism pole points
Weighs 0.06 lb (0.03 kg)

The plumb bob point is a replacement part
Fits any of the SECO plumb bobs

The TopoBoot®, made of black nylon, screws over the precision point and increases the area of the point for use on soft surfaces in topo shots
The Topo-Boot is removable and stores conveniently under the large, easy-to read vial
Weighs 0.05 lb (0.02 kg)

Durable removable-tip scribers are perfect for making quick and accurate marks on hard work pieces
Works well on metal, ceramic, concrete, stone, lumber or other surfaces
The scriber features a durable tungsten carbide point that is able to make precise marks to 1/100th of an inch
The magnetic cap quickly cleans up stray metal shavings
Weighs 0.05 lb (0.02 kg)

The heavy-duty leather sheath is double stitched top grain leather with a belt loop
Options ranging from 10 to 32 OZ

Crain’s Stedi-Rest® fits any 1.25 to 1.5 inch (32 to 38.1 mm) pole and can take the place of three separate products, level Vial Adjustment Jig, Prism Pole Bipod and a Rod Rest
Weighs 0.15 lb (0.07 kg)

This spray can holder is constructed of heavy-duty nylon Cordura® and a nylon webbing belt loop
Holds a paint can on hip for easy and convenient access
Orange
Weighs 0.14 lb (0.06 kg)

Features an anodized aluminum body
Easy-to-replace steel point, PN 5194-003
Sharp Point
Weighs 0.16 lb (0.07 kg)

This rubber ball is used as a pin cushion for holding stake tacks
Built-in belt loop

The bipod leg clip easily attaches to the base of any 1.25 inch O.D. prism or antenna pole
The bipod legs snap into the clip making the system convenient for transport or storage
Weighs 0.04 lb (0.02 kg)

3.37 inch steel body, steel body
Weighs 0.30 lb (0.14 kg)

40-minute vial
Includes screws
Weighs 0.03 lb (0.01 kg)

Features a die-cast aluminum body and an adjustable vial
Fits round or rectangular rods
Suitable for use with track light, robotic instruments, or conventional leveling
The snap-on level fits all poles with a 1 to 1.25 inch diameter
Feature a 40 minute sensitivity
Weighs 0.10 lb (0.04 kg)

3.37 inch steel body, removable point
Weighs 0.30 lb (0.14 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
For: Leica GPH1
Target Height: 86 mm
Length: 50 mm
Weighs 0.19 lb (0.09 kg)

The Rhino Ruler outlasts wood rulers four to one with a waterproof fiberglass construction prevents common problems that occur with wood rulers such as fading, splintering, and chipping
Engraved (Tenths/Inches) graduations resist weather and scratches
Easy-to-fold locking joints are tighter than traditional folding rulers made of wood allowing for a more accurate measurement along the ruler’s length
Weighs 0.40 lb (0.18 kg)

Adapts Swiss-style snap-on prisms to 5/8 x 11 tribrach adapter or prism pole
Weighs 0.06 lb (0.03 kg)