Crain’s Stedi-Rest® fits any 1.25 to 1.5 inch (32 to 38.1 mm) pole and can take the place of three separate products, level Vial Adjustment Jig, Prism Pole Bipod and a Rod Rest Weighs 0.15 lb (0.07 kg)
The TopoBoot®, made of black nylon, screws over the precision point and increases the area of the point for use on soft surfaces in topo shots The Topo-Boot is removable and stores conveniently under the large, easy-to read vial Weighs 0.05 lb (0.02 kg)
The bipod leg clip easily attaches to the base of any 1.25 inch O.D. prism or antenna pole The bipod legs snap into the clip making the system convenient for transport or storage Weighs 0.04 lb (0.02 kg)
New Claw design for the TSC7/Ranger7 Controller Also compatible with the TSC3/Ranger3, for those wanting a more heavy-duty claw-clamp solution with more tilt positions on the pole Made of durable machine-anodized aluminum and stainless steel construction for years of trouble-free use in the field Includes replaceable silicone pads that hold the controller securely This new design utilizes SECO’s stronger quick release that we use on heavy tablet pole brackets Pole Clamp fits all standard 1.25 inch diameter poles Pole Clamp has six tilt positions from vertical to horizontal of the display
This SECO bracket holds the FC5000/FC6000 (Topcon), RT3/4 (Carlson) and Mesa 2/3 (Juniper) tablets The set-up includes a Ball-and-Socket Link and a Claw clamp with 1-inch (25-mm) ram ball Ball-and-Socket version allows a collector to be in more positions All ports, connections, and camera are accessible and usable with the bracket attached Easy “snap in/out” design holds the tablet securely Made from a single, solid 0.080-inch (2.03-mm) aluminum sheet metal which is powder-coated black Weighs 0.95 lb (0.43 kg)
SECOs Ball-and-Socket X-Grip® features a spring-loaded cradle that expands/contracts to fit your 7-inch tablet Rubber-coated tips firmly hold your tablet in place Easy to access grip knobs enable quick-release of your tablet Connects using the proven RAM ball-and-socket system allowing for multiple positions Pole clamp and socket link (5200-201) sold separately. Constructed of marine-grade stainless-steel components and high-strength composite Fits most 7-inch tablets with or without sleeves, as well as some smaller tablets Minimum Width 2.25 in (57 mm) Maximum Width 5.75 in (146 mm) Depth 0.875 in (22 mm) Weighs 0.75 lb (0.34 kg)
These Claw™ clamps are also made of durable anodized aluminum The Claw technology allows maximum tightening on the pole without crushing The Ball-and-Socket versions allow a handheld data collector to be in more positions Customize your own solution with these components The clamps are designed to fit a pole diameter of 1.25 inch (32 mm) Ball-and-Socket Cradle (1-inch ram ball, designed for 1.25 inch OD poles) Plain with 1 inch Ball Weighs 0.31 lb (0.14 kg)
The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used Features a 40-minute Vial and Compass built on to the clamp The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.43 lb (0.19 kg)
The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Quick-Release cradles plug directly into Quick-Release pole clamps Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used Features a Compass built on to the clamp The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.38 lb (0.17 kg)
The Claw™ is a clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it Made of durable anodized aluminum for years of trouble-free use in the field These Quick-Release cradles plug directly in to Quick-Release Pole Clamps Designed for: Allegro 2, 3 and Surveyor 2 The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.46 lb (0.21 kg)
The Claw™ is a new and improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it Made of durable anodized aluminum for years of trouble-free use in the field These Quick-Release cradles plug directly in to Quick-Release Pole Clamps Designed for: TSC3 The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.46 lb (0.21 kg)
The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Designed for standard 1.25 inch OD rods and poles Includes Quick Release and Battery Slot Weighs 0.46 lb (0.21 kg)
The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Designed for larger 1.5 inch OD rods and poles Weighs 0.35 lb (0.16 kg)
The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Cradle: Designed for Leica RX Series, C-10/C-15 Weighs 0.35 lb (0.16 kg)
The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Designed for standard poles or rods with a 0.75 to 1.25 inch OD Weighs 0.32 lb (0.14 kg)
Convenient for adjusting and calibrating pole vials in the office The adjusting jig features an ‘L-bracket’ to rest the prism pole point on and the adjustable top piece Use the adjustable top to center your pole before adjusting the bubble Weighs 1.00 lb (0.45 kg)