This system holds a GPS or RTK-type rod to the door of your survey truck for a mobile solution and off-road surveys Easy to set up and fits most mid- to full-size pickups and SUVs, kit available for Ford F-Series, PN 5114-21-054 Open and close the doors, roll the windows up and down, all normal door functions are preserved Flo Orange Weighs 6.20 lb (2.80 kg)
New Claw design for the TSC7/Ranger7 Controller Also compatible with the TSC3/Ranger3, for those wanting a more heavy-duty claw-clamp solution with more tilt positions on the pole Made of durable machine-anodized aluminum and stainless steel construction for years of trouble-free use in the field Includes replaceable silicone pads that hold the controller securely This new design utilizes SECO’s stronger quick release that we use on heavy tablet pole brackets Pole Clamp fits all standard 1.25 inch diameter poles Pole Clamp has six tilt positions from vertical to horizontal of the display
This SECO bracket holds the FC5000/FC6000 (Topcon), RT3/4 (Carlson) and Mesa 2/3 (Juniper) tablets The set-up includes a Ball-and-Socket Link and a Claw clamp with 1-inch (25-mm) ram ball Ball-and-Socket version allows a collector to be in more positions All ports, connections, and camera are accessible and usable with the bracket attached Easy “snap in/out” design holds the tablet securely Made from a single, solid 0.080-inch (2.03-mm) aluminum sheet metal which is powder-coated black Weighs 0.95 lb (0.43 kg)
The Claw™ is a clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it Made of durable anodized aluminum for years of trouble-free use in the field These Quick-Release cradles plug directly in to Quick-Release Pole Clamps Designed for: Allegro 2, 3 and Surveyor 2 The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.46 lb (0.21 kg)
This bracket holds a radio antenna securely to a tripod leg The heavy-duty bracket makes plumbing the antenna easy Fits all full-size and heavy-duty tripods and uses a 1/2 inch long, 5/8 x 11 male stud to secure the antenna or extension (tripod sold separately) It can be used with the SECO Six Foot Snap-Lock Radio Antenna Pole (#5139-02) or any extension with a male/female 5/8 x 11 connection Weighs 1.55 lb (0.70 kg)
The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Quick-Release cradles plug directly into Quick-Release pole clamps Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used Features a Compass built on to the clamp The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.38 lb (0.17 kg)
The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used Features a 40-minute Vial and Compass built on to the clamp The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.43 lb (0.19 kg)
The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Designed for standard 1.25 inch OD rods and poles Includes Quick Release and Battery Slot Weighs 0.46 lb (0.21 kg)
The Claw™ is a new and improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it Made of durable anodized aluminum for years of trouble-free use in the field These Quick-Release cradles plug directly in to Quick-Release Pole Clamps Designed for: TSC3 The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.46 lb (0.21 kg)
Convenient for adjusting and calibrating pole vials in the office The adjusting jig features an ‘L-bracket’ to rest the prism pole point on and the adjustable top piece Use the adjustable top to center your pole before adjusting the bubble Weighs 1.00 lb (0.45 kg)
The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Designed for standard poles or rods with a 0.75 to 1.25 inch OD Weighs 0.32 lb (0.14 kg)
These Claw™ clamps are also made of durable anodized aluminum The Claw technology allows maximum tightening on the pole without crushing The Ball-and-Socket versions allow a handheld data collector to be in more positions Customize your own solution with these components The clamps are designed to fit a pole diameter of 1.25 inch (32 mm) Ball-and-Socket Cradle (1-inch ram ball, designed for 1.25 inch OD poles) Plain with 1 inch Ball Weighs 0.31 lb (0.14 kg)
The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Designed for larger 1.5 inch OD rods and poles Weighs 0.35 lb (0.16 kg)
The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Cradle: Designed for Leica RX Series, C-10/C-15 Weighs 0.35 lb (0.16 kg)
SECOs Ball-and-Socket X-Grip® features a spring-loaded cradle that expands/contracts to fit your 7-inch tablet Rubber-coated tips firmly hold your tablet in place Easy to access grip knobs enable quick-release of your tablet Connects using the proven RAM ball-and-socket system allowing for multiple positions Pole clamp and socket link (5200-201) sold separately. Constructed of marine-grade stainless-steel components and high-strength composite Fits most 7-inch tablets with or without sleeves, as well as some smaller tablets Minimum Width 2.25 in (57 mm) Maximum Width 5.75 in (146 mm) Depth 0.875 in (22 mm) Weighs 0.75 lb (0.34 kg)
This new laser detector adapter turns any Quick Change Pole into a laser grade rod Use it for digging footings and measuring elevations Works with the standard detector rod clamp that comes with the detector The azimuth is adjustable to orient the detector toward the laser so reading the graduations is easy Machined anodized-aluminum for superior strength and weight concerns Height: 150 mm Weighs 0.60 lb (0.27 kg)
The open clamp attachment allows quick and easy connection to the pole; it connects to 1 to 1.25 inch (25.4 to 31.8 mm) OD poles The brass male 5/8 x 11 captive stud is easily removed for direct attachment of the radio antenna to the bar Comes with a non-slip Velcro® cable strap to help manage the radio cable Can be used with the Radio Antenna Adapter 2133-00 which adapts 1-1/8 x 18 radio antennas to any 5/8 x 11 threaded tip (sold separately) Weighs 0.22 lb (0.10 kg)
This rotating friction top tribrach adapter allows the prism to be pointed after installation in the tribrach Fits all tribrachs Weighs 0.9 lb (0.41 kg)
Fiberglass pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections 20 cm in Length 1.25 in (32 mm) Outside Diameter Weighs 0.34 lb (0.15 kg)
$60.75
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Find out more here.