SECO Adapters, Brackets, Cradles

New Claw design for the TSC7/Ranger7 Controller
Also compatible with the TSC3/Ranger3, for those wanting a more heavy-duty claw-clamp solution with more tilt positions on the pole
Made of durable machine-anodized aluminum and stainless steel construction for years of trouble-free use in the field
Includes replaceable silicone pads that hold the controller securely
This new design utilizes SECO’s stronger quick release that we use on heavy tablet pole brackets
Pole Clamp fits all standard 1.25 inch diameter poles
Pole Clamp has six tilt positions from vertical to horizontal of the display

This SECO bracket holds the FC5000/FC6000 (Topcon), RT3/4 (Carlson) and Mesa 2/3 (Juniper) tablets
The set-up includes a Ball-and-Socket Link and a Claw clamp with 1-inch (25-mm) ram ball
Ball-and-Socket version allows a collector to be in more positions
All ports, connections, and camera are accessible and usable with the bracket attached
Easy “snap in/out” design holds the tablet securely
Made from a single, solid 0.080-inch (2.03-mm) aluminum sheet metal which is powder-coated black
Weighs 0.95 lb (0.43 kg)

The Claw™ is a clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it
Made of durable anodized aluminum for years of trouble-free use in the field
These Quick-Release cradles plug directly in to Quick-Release Pole Clamps
Designed for: Allegro 2, 3 and Surveyor 2
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.46 lb (0.21 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Quick-Release cradles plug directly into Quick-Release pole clamps
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
Features a Compass built on to the clamp
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.38 lb (0.17 kg)

This bracket holds a radio antenna securely to a tripod leg
The heavy-duty bracket makes plumbing the antenna easy
Fits all full-size and heavy-duty tripods and uses a 1/2 inch long, 5/8 x 11 male stud to secure the antenna or extension (tripod sold separately)
It can be used with the SECO Six Foot Snap-Lock Radio Antenna Pole (#5139-02) or any extension with a male/female 5/8 x 11 connection
Weighs 1.55 lb (0.70 kg)

The Claw™ is a new and improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it
Made of durable anodized aluminum for years of trouble-free use in the field
These Quick-Release cradles plug directly in to Quick-Release Pole Clamps
Designed for: TSC3
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.46 lb (0.21 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
Features a 40-minute Vial and Compass built on to the clamp
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.43 lb (0.19 kg)

Convenient for adjusting and calibrating pole vials in the office
The adjusting jig features an ‘L-bracket’ to rest the prism pole point on and the adjustable top piece
Use the adjustable top to center your pole before adjusting the bubble
Weighs 1.00 lb (0.45 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for standard poles or rods with a 0.75 to 1.25 inch OD
Weighs 0.32 lb (0.14 kg)

SECOs Ball-and-Socket X-Grip® features a spring-loaded cradle that expands/contracts to fit your 7-inch tablet
Rubber-coated tips firmly hold your tablet in place
Easy to access grip knobs enable quick-release of your tablet
Connects using the proven RAM ball-and-socket system allowing for multiple positions
Pole clamp and socket link (5200-201) sold separately.
Constructed of marine-grade stainless-steel components and high-strength composite
Fits most 7-inch tablets with or without sleeves, as well as some smaller tablets
Minimum Width 2.25 in (57 mm)
Maximum Width 5.75 in (146 mm)
Depth 0.875 in (22 mm)
Weighs 0.75 lb (0.34 kg)

These Claw™ clamps are also made of durable anodized aluminum
The Claw technology allows maximum tightening on the pole without crushing
The Ball-and-Socket versions allow a handheld data collector to be in more positions
Customize your own solution with these components
The clamps are designed to fit a pole diameter of 1.25 inch (32 mm)
Ball-and-Socket Cradle (1-inch ram ball, designed for 1.25 inch OD poles)
Plain with 1 inch Ball
Weighs 0.31 lb (0.14 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for larger 1.5 inch OD rods and poles
Weighs 0.35 lb (0.16 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for standard 1.25 inch OD rods and poles
Includes Quick Release and Battery Slot
Weighs 0.46 lb (0.21 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Cradle: Designed for Leica RX Series, C-10/C-15
Weighs 0.35 lb (0.16 kg)

This system holds a GPS or RTK-type rod to the door of your survey truck for a mobile solution and off-road surveys
Easy to set up and fits most mid- to full-size pickups and SUVs, kit available for Ford F-Series, PN 5114-21-054
Open and close the doors, roll the windows up and down, all normal door functions are preserved
Flo Orange
Weighs 6.20 lb (2.80 kg)

The open clamp attachment allows quick and easy connection to the pole; it connects to 1 to 1.25 inch (25.4 to 31.8 mm) OD poles
The brass male 5/8 x 11 captive stud is easily removed for direct attachment of the radio antenna to the bar
Comes with a non-slip Velcro® cable strap to help manage the radio cable
Can be used with the Radio Antenna Adapter 2133-00 which adapts 1-1/8 x 18 radio antennas to any 5/8 x 11 threaded tip (sold separately)
Weighs 0.22 lb (0.10 kg)

This rotating friction top tribrach adapter allows the prism to be pointed after installation in the tribrach
Fits all tribrachs
Weighs 0.9 lb (0.41 kg)

Constructed from anodized aluminum, this adapts 3-1/2 x 8 tripods to 5/8 x 11
Weighs 0.70 lb (0.32 kg)

Fiberglass pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections
20 cm in Length
1.25 in (32 mm) Outside Diameter
Weighs 0.34 lb (0.15 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Leica users w/ 86 mm prism
Weighs 0.11 lb (0.05 kg)