SECOs Ball-and-Socket X-Grip® features a spring-loaded cradle that expands/contracts to fit your 7-inch tablet Rubber-coated tips firmly hold your tablet in place Easy to access grip knobs enable quick-release of your tablet Connects using the proven RAM ball-and-socket system allowing for multiple positions Pole clamp and socket link (5200-201) sold separately. Constructed of marine-grade stainless-steel components and high-strength composite Fits most 7-inch tablets with or without sleeves, as well as some smaller tablets Minimum Width 2.25 in (57 mm) Maximum Width 5.75 in (146 mm) Depth 0.875 in (22 mm) Weighs 0.75 lb (0.34 kg)
The TopoBoot®, made of black nylon, screws over the precision point and increases the area of the point for use on soft surfaces in topo shots The Topo-Boot is removable and stores conveniently under the large, easy-to read vial Weighs 0.05 lb (0.02 kg)
Crain’s Stedi-Rest® fits any 1.25 to 1.5 inch (32 to 38.1 mm) pole and can take the place of three separate products, level Vial Adjustment Jig, Prism Pole Bipod and a Rod Rest Weighs 0.15 lb (0.07 kg)
Features a die-cast aluminum body and an adjustable vial Fits round or rectangular rods Suitable for use with track light, robotic instruments, or conventional leveling The snap-on level fits all poles with a 1 to 1.25 inch diameter Feature a 40 minute sensitivity Weighs 0.10 lb (0.04 kg)
This rotating friction top tribrach adapter allows the prism to be pointed after installation in the tribrach Fits all tribrachs Weighs 0.9 lb (0.41 kg)
This bracket holds a radio antenna securely to a tripod leg The heavy-duty bracket makes plumbing the antenna easy Fits all full-size and heavy-duty tripods and uses a 1/2 inch long, 5/8 x 11 male stud to secure the antenna or extension (tripod sold separately) It can be used with the SECO Six Foot Snap-Lock Radio Antenna Pole (#5139-02) or any extension with a male/female 5/8 x 11 connection Weighs 1.55 lb (0.70 kg)
The open clamp attachment allows quick and easy connection to the pole; it connects to 1 to 1.25 inch (25.4 to 31.8 mm) OD poles The brass male 5/8 x 11 captive stud is easily removed for direct attachment of the radio antenna to the bar Comes with a non-slip Velcro® cable strap to help manage the radio cable Can be used with the Radio Antenna Adapter 2133-00 which adapts 1-1/8 x 18 radio antennas to any 5/8 x 11 threaded tip (sold separately) Weighs 0.22 lb (0.10 kg)
Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm For: Leica GPH1 Target Height: 86 mm Length: 50 mm Weighs 0.19 lb (0.09 kg)
Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm For: Leica Adjustable Target Height: 86 mm to 125 mm Weighs 0.34 lb (0.15 kg)
This new laser detector adapter turns any Quick Change Pole into a laser grade rod Use it for digging footings and measuring elevations Works with the standard detector rod clamp that comes with the detector The azimuth is adjustable to orient the detector toward the laser so reading the graduations is easy Machined anodized-aluminum for superior strength and weight concerns Height: 150 mm Weighs 0.60 lb (0.27 kg)
Convenient for adjusting and calibrating pole vials in the office The adjusting jig features an ‘L-bracket’ to rest the prism pole point on and the adjustable top piece Use the adjustable top to center your pole before adjusting the bubble Weighs 1.00 lb (0.45 kg)
5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms For Topcon users with 77 mm prism Weighs 0.14 lb (0.06 kg)
5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms For Users with SECO, Sokkia, Omni 115 mm prism Weighs 0.06 lb (0.03 kg)
$28.56
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Find out more here.