The Mini Prism Monopod Kit forms a stable base with your 6000-Series Mini Prism which is sold separately, PN 6405-10-FOB pictured The kit is easy to set up and can be used by just one person Ideal for: construction surveys, inspections, asbuilts, and many other applications Add a standard 5/8 x 11 extension to the kit to achieve heights to 4 feet Weighs 2.25 lb (1.02 kg)
This ‘no-frills’ imported three-section pole is designed to give service in the field at a lower purchase price Aluminum outer and inner pole 40-minute level vial Adjustable tip Dual Grad (0.01 ft/cm) Hardened steel points Twist-Lock mechanism Red and White 15.25 ft (4.65 m) Weighs 5.38 lb (2.44 kg)
Non-conductive lightweight fiberglass leveling rods Waterproof and corrosion-proof even against seawater Unique patented oval shape permits equal size graduations full-length, prevents rod from rolling and is easier to hold Numeral and graduations are epoxy-protected for maximum wear-resistance and sized for maximum readability The Level Rod Sections are cushioned with glides to prevent wear Height measuring gauge on the back side 5/8 x 11 female thread for prism attachment 25 ft length Graduations 10ths Includes carrying bag Weighs 4.8 lb (2.18 kg)
Many find these rover rods are faster to setup and more user-friendly than traditional rods Features include a one-piece design and two locking systems for stability, the snap lock prevents slippage and the compression lock centers the telescopic inner pole and maintains straightness External “GT” Graduations (10ths/100ths) The rod telescopes, locks at 2 meters, and collapses back to 1.354 meters The lightweight aluminum rods come with a 40-minute vial Hardware is Flo Yellow Weighs 2.35 lb (1.07 kg)
Made from durable ANSI/ISEA compliant polyester and polyester mesh Developed in conjunction with surveyors from the California Department of Transportation Features include YKK zippers, 4-inch (10.16 cm) wide reflective tape with 2-inch (5.08 cm) wide silver stripes made with 3M Scotchlite Reflective Material Padded collar is made with Outlast fabric on the inside Includes many quality features; multiple pockets for cell phone, tapes, radio, pencils, maps, spray cans and etc Plus, two inside pockets and comes with dual mic clips ANSI/ISEA Class 3
Developed in conjunction with surveyors from the California DOT Meets ANSI/ISEA Class 2 requirements Features include bright fluorescent material, 4-inch (10.16 cm) wide contrasting reflective material with 2-inch (5.08 cm) wide silver stripes made of 3M™ Scotchlite™ reflective material Made of durable polyester, brass grommets, heavy-duty webbing and trim, and a genuine YKK™ zipper Adaptive Comfort® material by Outlast®, a Certified Space Technology™, designed to balance body temperature Features four large pockets on the outside and two generous pockets on the inside — great for field books, tapes, pencils, flagging, cell phones Includes two spray can holders
Combination of hardwood legs with fiberglass dowels provides stability and weather resistance Large aluminum head and leg hinges provide stable mounting base Double-banded extension legs and large positive locking quick clamp with large quick release clamps for extra stability Powder-coated wear-resistant metal hardware Aluminum shoe with hardened steel replaceable shoe points Includes: plastic head cap for protection, heavy-duty poly-webbing shoulder strap for ease of carrying to the job site (not shown) 5/8 x 11 threaded post accommodates standard instruments — an ideal tripod for many different applications Lock type: Quick Clamp Legs: Birch wood/Fiberglass Hybrid Extends: 73 inches (1.85 m) Head: Triangle/Flat Color: Orange Weighs 16.20 lb (7.35 kg)
This ‘no-frills’ imported two-section pole is designed to give service in the field at a lower purchase price Aluminum outer and inner pole 40-minute level vial Adjustable Tip Dual Grad (0.01 ft/cm) Hardened steel points TLV lock mechanism Red and White 11.81 ft (3.60 m) Weighs 3.65 lb (1.66 kg)
Here’s a versatile prism system in a small package The assembly features a 25 mm copper-coated prism, for fog prevention, a tilting holder, with friction axis, zero or -30 mm offset Powder painted Fluorescent Orange with Fluorescent Yellow targets Includes a 40-min adjustable circular center-mounted vial Assembly can mounted on a Prism pole or tribrach at three heights: 70 mm, 100 mm, 115 mm, or can be hand-held using the plumb bob bracket or with S-hook for quick attachment to plumb bob Also included a point for stake-out work, and a system bag with belt loop Weighs 0.34 lb (0.15 kg)
Designed to comply with ANSI/ISEA Class 2 standards for high-visibility safety apparel Features convenient pockets with sturdy snap fasteners, map pocket and mic clip 100% polyester Weighs 1.67 lb (0.76 kg)
Comes with no-crush bipod head, which prevents crushing of carbon fiber range or prism poles even when excess force is used A surveyor can set up a freestanding GPS antenna pole or prism pole 1-to-1.25-inch (25.4-to-31.8 mm) OD Poles attach easily through the open clamp 1.5 inch (3.81 cm) OD poles can be loaded through the top The legs (independently) extend to 6 feet (1.8 m) and collapse to 43 inches (109 cm) Comes with bag and leg clip for easy transport Construction Series Weighs 4.25 lb (1.93 kg)
This three-section pole features a compression locking mechanism Constructed of sturdy aluminum tubing and a two-stage adjustable top-threaded tip Finished with electrostatic powder paint coating on the outer pole and permanent silk-screened on the inner pole Red and White Adjustable or Fixed Tip Dual Grad (10ths/cm) 15.25 ft (4.65 m) extended, 5.41 ft (1.65 m) closed
This tripod is ideal for use with poles under 24 inches long 1-to-1.5 inch (25.4-to-38.1 mm) diameter poles thread easily through the open clamp on top Legs are a fixed length of 12 inches each Include stainless steel clamp screw and rubber tips Weighs 1.30 lb (0.6 kg)
The Claw™ is a clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it Made of durable anodized aluminum for years of trouble-free use in the field These Quick-Release cradles plug directly in to Quick-Release Pole Clamps Designed for: Allegro 2, 3 and Surveyor 2 The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.46 lb (0.21 kg)
This ‘no-frills’ imported single-section pole is designed to give service in the field at a lower purchase price Aluminum outer and inner pole 40-minute level vial Adjustable tip Dual Grad (0.01 ft/cm) Hardened steel points TLV Locking mechanism Red and White 8.53 ft (2.60 m) Weighs 2.67 lb (1.21 kg)
This bracket holds a radio antenna securely to a tripod leg The heavy-duty bracket makes plumbing the antenna easy Fits all full-size and heavy-duty tripods and uses a 1/2 inch long, 5/8 x 11 male stud to secure the antenna or extension (tripod sold separately) It can be used with the SECO Six Foot Snap-Lock Radio Antenna Pole (#5139-02) or any extension with a male/female 5/8 x 11 connection Weighs 1.55 lb (0.70 kg)
The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Quick-Release cradles plug directly into Quick-Release pole clamps Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used Features a Compass built on to the clamp The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.38 lb (0.17 kg)
The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used Features a 40-minute Vial and Compass built on to the clamp The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.43 lb (0.19 kg)
The original Open Clamp Pole Bracket and Cradle technology designed by SECO These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller Manufactured from black anodized aluminum Designed for standard 1.25 inch OD rods and poles Includes Quick Release and Battery Slot Weighs 0.46 lb (0.21 kg)
$113.87
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Find out more here.