SECO

TRIPOD,ECONO,QUICK CLAMP,ALUM

These aluminum leveling rods are made of a light and durable alloy
The telescopic sections are anodized and silk-screened with moisture-resistant ink
Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side
These rods are 3-Sections and come in 10ths graduations
Length 9 ft
Each rod includes a special level and protective bag
Weighs 2.40 lb (1.10 kg)

The open clamp attachment allows quick and easy connection to the pole; it connects to 1 to 1.25 inch (25.4 to 31.8 mm) OD poles
The brass male 5/8 x 11 captive stud is easily removed for direct attachment of the radio antenna to the bar
Comes with a non-slip Velcro® cable strap to help manage the radio cable
Can be used with the Radio Antenna Adapter 2133-00 which adapts 1-1/8 x 18 radio antennas to any 5/8 x 11 threaded tip (sold separately)
Weighs 0.22 lb (0.10 kg)

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs
Features a Quick Clamp and a Triangle/Flat head
Tripod Head Size: 12cm, +,-2mm from flat side to opposite corner
The telescopic Aluminum (Round) legs allow for setup to extend to 63.5 in (1.60 m)
Hardware is Black only
Weighs 7.45 lb (3.38 kg)

For triple prisms and prism targets or tribrachs
Interior Dimensions: 10 x 9.5 x 3 in (25.4 x 24.1 x 7.7 cm)*
Orange
Weighs 1.06 lb (0.48 kg)

For triple prisms and prism targets or tribrachs
Interior Dimensions: 10 x 9.5 x 3 in (25.4 x 24.1 x 7.7 cm)*
Orange
Weighs 1.06 lb (0.48 kg)

Magnet has a 3.5 inch diameters
Features a 5/8 x 11 tip
Weighs 1.17 lb (0.53 kg)

Designed for vertical triple prism assemblies
Measures: 15 x 8 x 2 in (38.1 x 20.3 x 5.1 cm)*
Orange
Weighs 1.45 lb (0.66 kg)

This lightweight bipod is used to keep a GPS or robotic pole off the ground when not in use
Weighs 0.90 lb (0.41 kg)

Heavy-Duty Lath Bag with Rhinotek material on the bottom and six inches up the sides
Designed 48 inches (1.2 m) deep
Orange
Weighs approximately 1.50 lb (0.68 kg)

This new laser detector adapter turns any Quick Change Pole into a laser grade rod
Use it for digging footings and measuring elevations
Works with the standard detector rod clamp that comes with the detector
The azimuth is adjustable to orient the detector toward the laser so reading the graduations is easy
Machined anodized-aluminum for superior strength and weight concerns
Height: 150 mm
Weighs 0.60 lb (0.27 kg)

Holds a tilting prism with tribrach and adapter
Measures: 12 x 12 x 3 in (30.5 x 30.5 x 7.6 cm)*
Orange
Weighs 1.85 lb (0.84 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Cradle: Designed for Leica RX Series, C-10/C-15
Weighs 0.35 lb (0.16 kg)

SECOs Ball-and-Socket X-Grip® features a spring-loaded cradle that expands/contracts to fit your 7-inch tablet
Rubber-coated tips firmly hold your tablet in place
Easy to access grip knobs enable quick-release of your tablet
Connects using the proven RAM ball-and-socket system allowing for multiple positions
Pole clamp and socket link (5200-201) sold separately.
Constructed of marine-grade stainless-steel components and high-strength composite
Fits most 7-inch tablets with or without sleeves, as well as some smaller tablets
Minimum Width 2.25 in (57 mm)
Maximum Width 5.75 in (146 mm)
Depth 0.875 in (22 mm)
Weighs 0.75 lb (0.34 kg)

Features space inside for any standard 12 inch, five-gallon bucket
Orange
Weighs 1.50 lb (0.68 kg) without bucket and approx. 3.85 lb (1.75 kg) with bucket added

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for larger 1.5 inch OD rods and poles
Weighs 0.35 lb (0.16 kg)

Constructed from anodized aluminum, this adapts 3-1/2 x 8 tripods to 5/8 x 11
Weighs 0.70 lb (0.32 kg)

This 5-section aluminum leveling rod are made of a light and durable alloy
The telescopic sections are anodized and silk-screened with moisture-resistant ink
Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side
The rod is 16.4 ft length and uses 10ths graduations
Each rod includes a special level and protective bag
Weighs 3.50 lb (1.60 kg)

This 5-section aluminum leveling rod are made of a light and durable alloy
The telescopic sections are anodized and silk-screened with moisture-resistant ink
Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side
The rod is 16.4 ft length and uses 10ths graduations
Each rod includes a special level and protective bag
Weighs 3.50 lb (1.60 kg)

These Claw™ clamps are also made of durable anodized aluminum
The Claw technology allows maximum tightening on the pole without crushing
The Ball-and-Socket versions allow a handheld data collector to be in more positions
Customize your own solution with these components
The clamps are designed to fit a pole diameter of 1.25 inch (32 mm)
Ball-and-Socket Cradle (1-inch ram ball, designed for 1.25 inch OD poles)
Plain with 1 inch Ball
Weighs 0.31 lb (0.14 kg)