SECO

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
For: Leica GPH1
Target Height: 86 mm
Length: 50 mm
Weighs 0.19 lb (0.09 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Topcon users with 77 mm prism
Weighs 0.14 lb (0.06 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Users with  SECO, Sokkia, Omni 115 mm prism
Weighs 0.06 lb (0.03 kg)

Adapts Swiss-style snap-on prisms to 5/8 x 11 tribrach adapter or prism pole
Weighs 0.06 lb (0.03 kg)

Features 5/8-11 Female to 1/4-20 Male
Weighs 0.17 lb (0.08 kg)

8-minute vial
Includes bearing and screws
Weighs 0.03 lb (0.01 kg)

This anodized aluminum adapter features female 5/8 x 11 threads
Weighs 0.05 lb (0.02 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Leica users w/ 86 mm prism
Weighs 0.11 lb (0.05 kg)

Lightweight aluminum center punches are great for marking a variety of materials or punching starter holes for nails or drill bits
Works well on metal, ceramic, concrete, stone, lumber or other surfaces
The magnetic cap quickly cleans up stray metal shavings
Weighs 0.13 lb (0.06 kg)

Holds four rolls of flagging
Includes a belt strap that allows the dispenser to be carried around the waist or over the shoulder
Weighs 0.34 lb (0.15 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
For: Leica Adjustable
Target Height: 86 mm to 125 mm
Weighs 0.34 lb (0.15 kg)

Heavily padded for triple prisms
Measures: 9 x 7 x 2 in (22.9 x 17.8 x 5.1 cm)*
Orange
Weighs 0.75 lb (0.34 kg)

Assembly is for 1.25-inch diameter poles
Featuring a 8-minute vial (#D11234)
Includes screws
Weighs 0.14 lb (0.06 kg)

18 inch Stake or Rebar Bag with Heavy-Duty Rhinotek

Fiberglass pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections
20 cm in Length
1.25 in (32 mm) Outside Diameter
Weighs 0.34 lb (0.15 kg)

This case fits most large controllers like the Ranger™ series, Allegro, TSC2™, etc
The case is padded with 0.25 in 1000D Cordura® material with khaki trim
Features a Velcro® flap closure, belt loop and shoulder strap
The main compartment of the case measures 10.25 x 5.25 x 2 in (26 x 13.3 x 5 cm)
The outside pocket is 6 x 5 in (15 x 12.7 cm)
Orange
Weighs 0.35 lb (0.16 kg)

This rotating friction top tribrach adapter allows the prism to be pointed after installation in the tribrach
Fits all tribrachs
Weighs 0.9 lb (0.41 kg)

The tripod features a ball-and-socket head, which makes leveling a bubble easy
The rubberized jaws hold a pole (up to 2 inch OD) firmly in place
Telescopic legs extend from 80 cm (2.62 ft) to 127 cm (4.17 ft)
Weighs 2.65 lb (1.20 kg)

Heavy-Duty Lath Bag with Rhinotek material on the bottom and six inches up the sides
Designed 36 inches (91.4 cm) deep
Orange
Weighs approximately 1.50 lb (0.68 kg)

The Carbon Fiber pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections
1.25 inch (32 mm) outside diameter
50 cm in length
Weighs 0.50 lb (0.23 kg)