40-minute level vial is located on the lock, away from the instruments on the pole The Quick-Release locking mechanism features adjustable tension via a set screw in the handle and another set screw to assist in keeping the spring in position Simple and fast setup One-section pole Dual Grad (10ths/cm) Adjustable Tip Powder-coated and silk screened aluminum Red and White 8.53 ft (2.60 m) extended, 4.97 ft (1.52 m) closed Weighs 3.30 lb (1.50 kg)
Many find these rover rods are faster to setup and more user-friendly than traditional rods Features include a one-piece design and two locking systems for stability, the snap lock prevents slippage and the compression lock centers the telescopic inner pole and maintains straightness External “GT” Graduations (10ths/100ths) The rod telescopes, locks at 2 meters, and collapses back to 1.354 meters The lightweight aluminum rods come with a 40-minute vial Hardware is Flo Yellow Weighs 2.35 lb (1.07 kg)
Designed to comply with ANSI/ISEA Class 2 standards for high-visibility safety apparel Features convenient pockets with sturdy snap fasteners, map pocket and mic clip 100% polyester Weighs 1.67 lb (0.76 kg)
Non-conductive lightweight fiberglass leveling rods Waterproof and corrosion-proof even against seawater Unique patented oval shape permits equal size graduations full-length, prevents rod from rolling and is easier to hold Numeral and graduations are epoxy-protected for maximum wear-resistance and sized for maximum readability The Level Rod Sections are cushioned with glides to prevent wear Height measuring gauge on the back side 5/8 x 11 female thread for prism attachment 25 ft length Graduations 10ths Includes carrying bag Weighs 4.8 lb (2.18 kg)
This ‘no-frills’ imported three-section pole is designed to give service in the field at a lower purchase price Aluminum outer and inner pole 40-minute level vial Adjustable tip Dual Grad (0.01 ft/cm) Hardened steel points Twist-Lock mechanism Red and White 15.25 ft (4.65 m) Weighs 5.38 lb (2.44 kg)
Here’s a versatile prism system in a small package The assembly features a 25 mm copper-coated prism, for fog prevention, a tilting holder, with friction axis, zero or -30 mm offset Powder painted Fluorescent Orange with Fluorescent Yellow targets Includes a 40-min adjustable circular center-mounted vial Assembly can mounted on a Prism pole or tribrach at three heights: 70 mm, 100 mm, 115 mm, or can be hand-held using the plumb bob bracket or with S-hook for quick attachment to plumb bob Also included a point for stake-out work, and a system bag with belt loop Weighs 0.34 lb (0.15 kg)
Developed in conjunction with surveyors from the California DOT Meets ANSI/ISEA Class 2 requirements Features include bright fluorescent material, 4-inch (10.16 cm) wide contrasting reflective material with 2-inch (5.08 cm) wide silver stripes made of 3M™ Scotchlite™ reflective material Made of durable polyester, brass grommets, heavy-duty webbing and trim, and a genuine YKK™ zipper Adaptive Comfort® material by Outlast®, a Certified Space Technology™, designed to balance body temperature Features four large pockets on the outside and two generous pockets on the inside — great for field books, tapes, pencils, flagging, cell phones Includes two spray can holders
Combination of hardwood legs with fiberglass dowels provides stability and weather resistance Large aluminum head and leg hinges provide stable mounting base Double-banded extension legs and large positive locking quick clamp with large quick release clamps for extra stability Powder-coated wear-resistant metal hardware Aluminum shoe with hardened steel replaceable shoe points Includes: plastic head cap for protection, heavy-duty poly-webbing shoulder strap for ease of carrying to the job site (not shown) 5/8 x 11 threaded post accommodates standard instruments — an ideal tripod for many different applications Lock type: Quick Clamp Legs: Birch wood/Fiberglass Hybrid Extends: 73 inches (1.85 m) Head: Triangle/Flat Color: Orange Weighs 16.20 lb (7.35 kg)
This ‘no-frills’ imported two-section pole is designed to give service in the field at a lower purchase price Aluminum outer and inner pole 40-minute level vial Adjustable Tip Dual Grad (0.01 ft/cm) Hardened steel points TLV lock mechanism Red and White 11.81 ft (3.60 m) Weighs 3.65 lb (1.66 kg)
Comes with no-crush bipod head, which prevents crushing of carbon fiber range or prism poles even when excess force is used A surveyor can set up a freestanding GPS antenna pole or prism pole 1-to-1.25-inch (25.4-to-31.8 mm) OD Poles attach easily through the open clamp 1.5 inch (3.81 cm) OD poles can be loaded through the top The legs (independently) extend to 6 feet (1.8 m) and collapse to 43 inches (109 cm) Comes with bag and leg clip for easy transport Construction Series Weighs 4.25 lb (1.93 kg)
This tripod is ideal for use with poles under 24 inches long 1-to-1.5 inch (25.4-to-38.1 mm) diameter poles thread easily through the open clamp on top Legs are a fixed length of 12 inches each Include stainless steel clamp screw and rubber tips Weighs 1.30 lb (0.6 kg)
Vests are manufactured to meet ANSI/ISEA Class 2 standards Features a cool, comfortable mesh back Includes special compartments for notebooks, pencils, compass, flagging tape, etc Also includes exterior radio mic clip 100% polyester Weighs 1.31 lb (0.59 kg)
The Claw™ is a clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it Made of durable anodized aluminum for years of trouble-free use in the field These Quick-Release cradles plug directly in to Quick-Release Pole Clamps Designed for: Allegro 2, 3 and Surveyor 2 The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.46 lb (0.21 kg)
The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Quick-Release cradles plug directly into Quick-Release pole clamps Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used Features a Compass built on to the clamp The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.38 lb (0.17 kg)
This bracket holds a radio antenna securely to a tripod leg The heavy-duty bracket makes plumbing the antenna easy Fits all full-size and heavy-duty tripods and uses a 1/2 inch long, 5/8 x 11 male stud to secure the antenna or extension (tripod sold separately) It can be used with the SECO Six Foot Snap-Lock Radio Antenna Pole (#5139-02) or any extension with a male/female 5/8 x 11 connection Weighs 1.55 lb (0.70 kg)
This ‘no-frills’ imported single-section pole is designed to give service in the field at a lower purchase price Aluminum outer and inner pole 40-minute level vial Adjustable tip Dual Grad (0.01 ft/cm) Hardened steel points TLV Locking mechanism Red and White 8.53 ft (2.60 m) Weighs 2.67 lb (1.21 kg)
The Claw™ is a new and improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it Made of durable anodized aluminum for years of trouble-free use in the field These Quick-Release cradles plug directly in to Quick-Release Pole Clamps Designed for: TSC3 The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.46 lb (0.21 kg)
Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping Scale width graduated to fill the entire face of the rod, Measuring scale on the back side that allows for overall height readings Special molded stand-off ribs protect the scales from wear Made with strong fiberglass, which is waterproof and corrosion-resistant CR Rod series is non-conductive Perfect for laser detector mounting with no special brackets required Three section rod Collapsed length is 58.375 inches (1.48 m) Graduations in 10ths Length 13 ft Weighs 5.00 lb (2.26 kg)
The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole The clamping function is limited so over-tightening cannot occur Made of durable anodized aluminum for years of trouble-free use in the field These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used Features a 40-minute Vial and Compass built on to the clamp The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145) Weighs 0.43 lb (0.19 kg)
$115.00
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Find out more here.