SECO

Crain’s Stedi-Rest® fits any 1.25 to 1.5 inch (32 to 38.1 mm) pole and can take the place of three separate products, level Vial Adjustment Jig, Prism Pole Bipod and a Rod Rest
Weighs 0.15 lb (0.07 kg)

This spray can holder is constructed of heavy-duty nylon Cordura® and a nylon webbing belt loop
Holds a paint can on hip for easy and convenient access
Orange
Weighs 0.14 lb (0.06 kg)

Features a die-cast aluminum body and an adjustable vial
Fits round or rectangular rods
Suitable for use with track light, robotic instruments, or conventional leveling
The snap-on level fits all poles with a 1 to 1.25 inch diameter
Feature a 40 minute sensitivity
Weighs 0.10 lb (0.04 kg)

This system tilts and slides up and down pin poles
Features a 25 mm, 0 offset silver-coated prism and a high-quality aluminum holder
Site cones double as locks
The prism has a 40-minute adjustable vial
The kit includes four 1-foot (30.5 cm) pole sections each with a 0.50-ft (15.24 cm) mark
Prism includes an adapter so it can be used on any pole or tribrach adapter with 5/8 x 11 threads
A system bag is also included
Weighs 1.40 lb (0.63 kg)

Magnet has a 3.5 inch diameters
Features a 5/8 x 11 tip
Weighs 1.17 lb (0.53 kg)

Hardened steel replacement point for most SECO tripods and prism pole points
Weighs 0.06 lb (0.03 kg)

This rotating friction top tribrach adapter allows the prism to be pointed after installation in the tribrach
Fits all tribrachs
Weighs 0.9 lb (0.41 kg)

Spacious & Organized: Double-zipped top-loading compartment, side pockets, and front battery pocket for ample storage and organization.
Weather-Resistant Design: Top rain flap, side pocket rain flaps protect equipment from rain and moisture.
Sturdy & Stable: Free-standing aluminum frame keeps the backpack upright, even when fully loaded.
Comfortable & Adjustable: Padded belt, shoulder straps with all-point adjustment, and rubberized carrying handle for a customized and comfortable fit.
Generous Dimensions: Interior dimensions of 17x10x10in, exterior dimensions of 24.5x15x16in, weighing only 8.00lb.
Vibrant Orange Color: High visibility for easy identification in the field.

The Rhino Ruler outlasts wood rulers four to one with a waterproof fiberglass construction prevents common problems that occur with wood rulers such as fading, splintering, and chipping
Engraved (Tenths/Inches) graduations resist weather and scratches
Easy-to-fold locking joints are tighter than traditional folding rulers made of wood allowing for a more accurate measurement along the ruler’s length
Weighs 0.40 lb (0.18 kg)

8-minute vial
Includes screws
Weighs 0.03 lb (0.01 kg)

40-minute vial
Includes screws
Weighs 0.03 lb (0.01 kg)

8-minute vial
Includes bearing and screws
Weighs 0.03 lb (0.01 kg)

Ideal for all handheld prism work, topos or precise layout work; it can be assembled in various configurations
This system comes with an adapter so that the prism assembly can be used with a standard 5/8 x 11 (male-threaded) prism poles, for height of 115 mm
Also featuring a 40-minute adjustable vial and white sight cones that provides improved vertical angle pointing
Comes with 0,-30 mm offset position
An orange Cordura® carrying case is included
All anodized aluminum section lengths are known (30 cm)
All aluminum parts are red
Weighs 1.60 lb (0.73 kg)

Incorporates a simple stainless steel locking mechanism that’s easy to set while adjusting the prism and target tilt
The heavy-duty 62 mm silver-coated prism is sealed in a strong canister with an ‘O’ ring to prevent water and dust from getting inside
The prism can be mounted in either 0 or -30 mm offset positions
Tilting axis height is 115 mm
Target Size is 6 x 9 inch
Target Colors are Flo Orange with Black
Weighs 1.75 lb (0.79 kg)

This bracket holds a radio antenna securely to a tripod leg
The heavy-duty bracket makes plumbing the antenna easy
Fits all full-size and heavy-duty tripods and uses a 1/2 inch long, 5/8 x 11 male stud to secure the antenna or extension (tripod sold separately)
It can be used with the SECO Six Foot Snap-Lock Radio Antenna Pole (#5139-02) or any extension with a male/female 5/8 x 11 connection
Weighs 1.55 lb (0.70 kg)

The open clamp attachment allows quick and easy connection to the pole; it connects to 1 to 1.25 inch (25.4 to 31.8 mm) OD poles
The brass male 5/8 x 11 captive stud is easily removed for direct attachment of the radio antenna to the bar
Comes with a non-slip Velcro® cable strap to help manage the radio cable
Can be used with the Radio Antenna Adapter 2133-00 which adapts 1-1/8 x 18 radio antennas to any 5/8 x 11 threaded tip (sold separately)
Weighs 0.22 lb (0.10 kg)

Features a No-Crush head, contoured to prevent crushing of carbon fiber range or prism poles, even when excess force is used
Features a Quick Lever™ locking mechanism that makes attaching or detaching the pole lightning fast — the lever cam action is mechanically simple and holds tight
The locking mechanism is made of non-marring Delrin® with an EPDM 80-durometer rubber plug for positive grip
Works with 1.25 inch (32 mm) Outside Diameter poles
Pole not included
Weighs 4.20 lb (1.90 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
For: Leica GPH1
Target Height: 86 mm
Length: 50 mm
Weighs 0.19 lb (0.09 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
For: Leica Adjustable
Target Height: 86 mm to 125 mm
Weighs 0.34 lb (0.15 kg)

This new laser detector adapter turns any Quick Change Pole into a laser grade rod
Use it for digging footings and measuring elevations
Works with the standard detector rod clamp that comes with the detector
The azimuth is adjustable to orient the detector toward the laser so reading the graduations is easy
Machined anodized-aluminum for superior strength and weight concerns
Height: 150 mm
Weighs 0.60 lb (0.27 kg)