SECO

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for standard poles or rods with a 0.75 to 1.25 inch OD
Weighs 0.32 lb (0.14 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for larger 1.5 inch OD rods and poles
Weighs 0.35 lb (0.16 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for standard 1.25 inch OD rods and poles
Includes Quick Release and Battery Slot
Weighs 0.46 lb (0.21 kg)

Features dual graduations, an adjustable tip that will adjust to a prism height of 65 mm-to-115 mm
TLV™ Lock
Carbon fiber poles are approximately 30% lighter than similar aluminum poles
Extends 8.53 ft (2.60 m) and collapses to 4.97 ft (1.51 m)
Weighs 2.30 lb (1.05 kg)

Center Punch Point fits all poles or products with male 5/8 x 11 threads
Hardened steel point will mark all metal and non-metal surfaces
Weighs 0.20 lb (0.09 kg)

These Claw™ clamps are also made of durable anodized aluminum
The Claw technology allows maximum tightening on the pole without crushing
The Ball-and-Socket versions allow a handheld data collector to be in more positions
Customize your own solution with these components
The clamps are designed to fit a pole diameter of 1.25 inch (32 mm)
Ball-and-Socket Cradle (1-inch ram ball, designed for 1.25 inch OD poles)
Plain with 1 inch Ball
Weighs 0.31 lb (0.14 kg)

New Claw design for the TSC7/Ranger7 Controller
Also compatible with the TSC3/Ranger3, for those wanting a more heavy-duty claw-clamp solution with more tilt positions on the pole
Made of durable machine-anodized aluminum and stainless steel construction for years of trouble-free use in the field
Includes replaceable silicone pads that hold the controller securely
This new design utilizes SECO’s stronger quick release that we use on heavy tablet pole brackets
Pole Clamp fits all standard 1.25 inch diameter poles
Pole Clamp has six tilt positions from vertical to horizontal of the display

The Claw™ is a clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it
Made of durable anodized aluminum for years of trouble-free use in the field
These Quick-Release cradles plug directly in to Quick-Release Pole Clamps
Designed for: Allegro 2, 3 and Surveyor 2
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.46 lb (0.21 kg)

The Claw™ is a new and improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it
Made of durable anodized aluminum for years of trouble-free use in the field
These Quick-Release cradles plug directly in to Quick-Release Pole Clamps
Designed for: TSC3
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.46 lb (0.21 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Quick-Release cradles plug directly into Quick-Release Pole Clamps
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Small image shows claw attached to cradle. Cradle not included.

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Quick-Release cradles plug directly into Quick-Release pole clamps
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
Features a Compass built on to the clamp
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.38 lb (0.17 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
Features a 40-minute Vial and Compass built on to the clamp
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.43 lb (0.19 kg)

Comes with no-crush bipod head, which prevents crushing of carbon fiber range or prism poles even when excess force is used
A surveyor can set up a freestanding GPS antenna pole or prism pole 1-to-1.25-inch (25.4-to-31.8 mm) OD
Poles attach easily through the open clamp 1.5 inch (3.81 cm) OD poles can be loaded through the top
The legs (independently) extend to 6 feet (1.8 m) and collapse to 43 inches (109 cm)
Comes with bag and leg clip for easy transport
Construction Series
Weighs 4.25 lb (1.93 kg)

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs
Features a Quick Clamp and a Triangle/Flat head
Tripod Head Size: 12cm, +,-2mm from flat side to opposite corner
The telescopic Aluminum (Round) legs allow for setup to extend to 63.5 in (1.60 m)
Hardware is Black only
Weighs 7.45 lb (3.38 kg)

This SECO bracket holds the FC5000/FC6000 (Topcon), RT3/4 (Carlson) and Mesa 2/3 (Juniper) tablets
The set-up includes a Ball-and-Socket Link and a Claw clamp with 1-inch (25-mm) ram ball
Ball-and-Socket version allows a collector to be in more positions
All ports, connections, and camera are accessible and usable with the bracket attached
Easy “snap in/out” design holds the tablet securely
Made from a single, solid 0.080-inch (2.03-mm) aluminum sheet metal which is powder-coated black
Weighs 0.95 lb (0.43 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Cradle: Designed for Leica RX Series, C-10/C-15
Weighs 0.35 lb (0.16 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
Scale width graduated to fill the entire face of the rod,
Measuring scale on the back side that allows for overall height readings
Special molded stand-off ribs protect the scales from wear
Made with strong fiberglass, which is waterproof and corrosion-resistant
CR Rod series is non-conductive
Perfect for laser detector mounting with no special brackets required
Three section rod
Collapsed length is 58.375 inches (1.48 m)
Graduations in 10ths
Length 13 ft
Weighs 5.00 lb (2.26 kg)

Features a new shorter collapsed length and a lighter weight
Constructed of strong, rigid fiberglass with reinforcing ribs for added stability
Waterproof and nonconductive
The rectangular-oval shape allows for wide, glare resistant scales that are wear-resistant
Tight locking mechanism features round buttons that resist jamming from sand and dirt
Features a 1/4 x 20 female adapter in top section
Graduations 10ths
Length 17 ft
Includes carrying case (#91411)
Weighs 5.00 lb (2.27 kg)

Non-conductive lightweight fiberglass leveling rods
Waterproof and corrosion-proof even against seawater
Unique patented oval shape permits equal size graduations full-length, prevents rod from rolling and is easier to hold
Numeral and graduations are epoxy-protected for maximum wear-resistance and sized for maximum readability
The Level Rod Sections are cushioned with glides to prevent wear
Height measuring gauge on the back side
5/8 x 11 female thread for prism attachment
25 ft length
Graduations 10ths
Includes carrying bag
Weighs 4.8 lb (2.18 kg)

The LR Series leveling rods are round and easy to handle
The LR-PRO is larger in diameter so sturdier and easier to read
25 ft
Graduations feet/10ths/100ths
Includes carrying case (replacement can be purchased here #91402)
Outside Diameter is 2 inches
Weighs 7.00 lb (3.17 kg)