List of products by brand SECO

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Cradle: Designed for Leica RX Series, C-10/C-15
Weighs 0.35 lb (0.16 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
Scale width graduated to fill the entire face of the rod,
Measuring scale on the back side that allows for overall height readings
Special molded stand-off ribs protect the scales from wear
Made with strong fiberglass, which is waterproof and corrosion-resistant
CR Rod series is non-conductive
Perfect for laser detector mounting with no special brackets required\
Two section rod
Collapsed length is 52 inches (1.32 m)
Graduations in 10ths
Length 8 ft
Weighs 3.00 lb (1.36 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Quick-Release cradles plug directly into Quick-Release Pole Clamps
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Small image shows claw attached to cradle. Cradle not included.

These aluminum leveling rods are made of a light and durable alloy
The telescopic sections are anodized and silk-screened with moisture-resistant ink
Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side
These rods are 3-Sections and come in 10ths graduations
Length 9 ft
Each rod includes a special level and protective bag
Weighs 2.40 lb (1.10 kg)

This new laser detector adapter turns any Quick Change Pole into a laser grade rod
Use it for digging footings and measuring elevations
Works with the standard detector rod clamp that comes with the detector
The azimuth is adjustable to orient the detector toward the laser so reading the graduations is easy
Machined anodized-aluminum for superior strength and weight concerns
Height: 150 mm
Weighs 0.60 lb (0.27 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for standard 1.25 inch OD rods and poles
Includes Quick Release and Battery Slot
Weighs 0.46 lb (0.21 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for larger 1.5 inch OD rods and poles
Weighs 0.35 lb (0.16 kg)

Height of 120 mm (0.394 ft)
40-min vial
Removable tip
Weighs 0.40 lb (0.18 kg)
Replacement Point: Standard 5194-05

This 5-section aluminum leveling rod are made of a light and durable alloy
The telescopic sections are anodized and silk-screened with moisture-resistant ink
Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side
The rod is 16.4 ft length and uses 10ths graduations
Each rod includes a special level and protective bag
Weighs 3.50 lb (1.60 kg)

These Claw™ clamps are also made of durable anodized aluminum
The Claw technology allows maximum tightening on the pole without crushing
The Ball-and-Socket versions allow a handheld data collector to be in more positions
Customize your own solution with these components
The clamps are designed to fit a pole diameter of 1.25 inch (32 mm)
Ball-and-Socket Cradle (1-inch ram ball, designed for 1.25 inch OD poles)
Plain with 1 inch Ball
Weighs 0.31 lb (0.14 kg)

This 5-section aluminum leveling rod are made of a light and durable alloy
The telescopic sections are anodized and silk-screened with moisture-resistant ink
Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side
The rod is 16.4 ft length and uses 10ths graduations
Each rod includes a special level and protective bag
Weighs 3.50 lb (1.60 kg)

SECOs Ball-and-Socket X-Grip® features a spring-loaded cradle that expands/contracts to fit your 7-inch tablet
Rubber-coated tips firmly hold your tablet in place
Easy to access grip knobs enable quick-release of your tablet
Connects using the proven RAM ball-and-socket system allowing for multiple positions
Pole clamp and socket link (5200-201) sold separately.
Constructed of marine-grade stainless-steel components and high-strength composite
Fits most 7-inch tablets with or without sleeves, as well as some smaller tablets
Minimum Width 2.25 in (57 mm)
Maximum Width 5.75 in (146 mm)
Depth 0.875 in (22 mm)
Weighs 0.75 lb (0.34 kg)

Features space inside for any standard 12 inch, five-gallon bucket
Orange
Weighs 1.50 lb (0.68 kg) without bucket and approx. 3.85 lb (1.75 kg) with bucket added

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for standard poles or rods with a 0.75 to 1.25 inch OD
Weighs 0.32 lb (0.14 kg)

Non-conductive lightweight fiberglass leveling rods
Waterproof and corrosion-proof even against seawater
Unique patented oval shape permits equal size graduations full-length, prevents rod from rolling and is easier to hold
Numeral and graduations are epoxy-protected for maximum wear-resistance and sized for maximum readability
The Level Rod Sections are cushioned with glides to prevent wear
Height measuring gauge on the back side
5/8 x 11 female thread for prism attachment
25 ft length
Graduations 10ths
Includes carrying bag
Weighs 4.8 lb (2.18 kg)

Made of heavy-duty water resistant polyester and Rhinotek™
Measures 27 x 11 x 11 inches (69 x 28 x 28 cm)
Orange
Weighs 1.56 lb (0.71 kg)

The tripod features a ball-and-socket head, which makes leveling a bubble easy
The rubberized jaws hold a pole (up to 2 inch OD) firmly in place
Telescopic legs extend from 80 cm (2.62 ft) to 127 cm (4.17 ft)
Weighs 2.65 lb (1.20 kg)

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs
Features a Quick Clamp and a Triangle/Flat head
Tripod Head Size: 12cm, +,-2mm from flat side to opposite corner
The telescopic Aluminum (Round) legs allow for setup to extend to 63.5 in (1.60 m)
Hardware is Black only
Weighs 7.45 lb (3.38 kg)

The Claw™ is a new and improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it
Made of durable anodized aluminum for years of trouble-free use in the field
These Quick-Release cradles plug directly in to Quick-Release Pole Clamps
Designed for: TSC3
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.46 lb (0.21 kg)

This tripod is suitable for any survey instrument use with 5/8 x 11 threads..
Legs have Twist Locks.
Legs are round aluminum.
Legs extend to 25.6 inches (65cm).
Head is flat triangular.
Hardware is black.
Weight is 6.68 pounds (3.03kg