List of products by brand SECO

The heavy-duty leather sheath is double stitched top grain leather with a belt loop
Options ranging from 10 to 32 OZ

This SECO plumb bob is precision-machined from solid brass
Includes a hardened steel point
Each bob contains storage area for a spare point

Tape made from epoxy paint coated steel
Features a rubberized black and high visibility yellow case with a positive thumb lock and release action
Graduations in 10ths / Metric / Inch
Length: 25 ft

Vests are manufactured to meet ANSI/ISEA Class 2 standards
Features a cool, comfortable mesh back
Includes special compartments for notebooks, pencils, compass, flagging tape, etc
Also includes exterior radio mic clip
100% polyester
Weighs 1.31 lb (0.59 kg)

Comes with no-crush bipod head, which prevents crushing of carbon fiber range or prism poles even when excess force is used
A surveyor can set up a freestanding GPS antenna pole or prism pole 1-to-1.25-inch (25.4-to-31.8 mm) OD
Poles attach easily through the open clamp 1.5 inch (3.81 cm) OD poles can be loaded through the top
The legs (independently) extend to 6 feet (1.8 m) and collapse to 43 inches (109 cm)
Comes with bag and leg clip for easy transport
Construction Series
Weighs 4.25 lb (1.93 kg)

Designed to comply with ANSI/ISEA Class 2 standards for high-visibility safety apparel
Features convenient pockets with sturdy snap fasteners, map pocket and mic clip
100% polyester
Weighs 1.67 lb (0.76 kg)

Made from durable ANSI/ISEA compliant polyester and polyester mesh
Developed in conjunction with surveyors from the California Department of Transportation
Features include YKK zippers, 4-inch (10.16 cm) wide reflective tape with 2-inch (5.08 cm) wide silver stripes made with 3M Scotchlite Reflective Material
Padded collar is made with Outlast fabric on the inside
Includes many quality features; multiple pockets for cell phone, tapes, radio, pencils, maps, spray cans and etc
Plus, two inside pockets and comes with dual mic clips
ANSI/ISEA Class 3

Developed in conjunction with surveyors from the California DOT
Meets ANSI/ISEA Class 2 requirements
Features include bright fluorescent material, 4-inch (10.16 cm) wide contrasting reflective material with 2-inch (5.08 cm) wide silver stripes made of 3M™ Scotchlite™ reflective material
Made of durable polyester, brass grommets, heavy-duty webbing and trim, and a genuine YKK™ zipper
Adaptive Comfort® material by Outlast®, a Certified Space Technology™, designed to balance body temperature
Features four large pockets on the outside and two generous pockets on the inside — great for field books, tapes, pencils, flagging, cell phones
Includes two spray can holders

Use for adjusting optical plummet tribrachs & tribrach bubbles
Machined black anodized aluminum
Features a 2-minute bubble
Weighs 1.30 lb (0.59 kg)

This rotating friction top tribrach adapter allows the prism to be pointed after installation in the tribrach
Fits all tribrachs
Weighs 0.9 lb (0.41 kg)

This adapts retro prisms to Swiss-style tribrach's
Includes a removable Zeiss plug and locking screw
Fits all tribrach's
Weighs 1.75 lb (0.80 kg)

Adapts Swiss-style snap-on prisms to 5/8 x 11 tribrach adapter or prism pole
Weighs 0.06 lb (0.03 kg)

For adapting Leica snap-on prisms to 5/8 x 11 tribrach adapter or prism pole
Stainless Steel body
Great for job sites near salt water
Weighs 0.16 lb (0.07 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Topcon users with 77 mm prism
Weighs 0.14 lb (0.06 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Leica users w/ 86 mm prism
Weighs 0.11 lb (0.05 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Users with  SECO, Sokkia, Omni 115 mm prism
Weighs 0.06 lb (0.03 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
For: Leica GPH1
Target Height: 86 mm
Length: 50 mm
Weighs 0.19 lb (0.09 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
For: Adjustable 5/8 x 11
Target Height: 50 mm to 115 mm
Weighs 0.29 lb (0.13 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
For: Leica Adjustable
Target Height: 86 mm to 125 mm
Weighs 0.34 lb (0.15 kg)

Constructed from anodized aluminum, this adapts 3-1/2 x 8 tripods to 5/8 x 11
Weighs 0.70 lb (0.32 kg)