List of products by brand SECO

The Tri-Max® is the only surveying grade tripod with certified accuracy – highly recommended for all servo driven and robotic total stations, 3-D laser scanners or construction lasers
The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use
Features a 6-5/8-inch Flat head with large center hole (2-5/8 inch) to facilitate an easy set-up over a point
A retaining system—which prevents leg kick out and accidental falls on slick surfaces—is stored on the inside of the leg and can be left in place when the tripod is not in use
The Tri-Max can handle equipment up to 65 lb (30 kg)
Screw Clamp Lock type
Black Hardware, Fiberglass Legs
Extends 71 in (1.8 m)
Collapses 44.5 in (113 cm)
Weighs 17.00 lb (7.70 kg)

The Tri-Max® is the only surveying grade tripod with certified accuracy – highly recommended for all servo-driven and robotic total stations, 3-D laser scanners or construction lasers
The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use
A retaining system—which prevents leg kick out and accidental falls on slick surfaces—is stored on the inside of the leg and can be left in place when the tripod is not in use
The large ‘footbed’ is there to facilitate solid planting for stability
The Tri-Max can handle equipment up to 65 lb (30 kg)
Quick Clamp Lock type
Fiberglass Legs, black Hardware
Extends 71 in (1.8 m)
Collapses 44.5 in (113 cm)
Weighs 17.00 lb (7.70 kg)

SECOs Ball-and-Socket X-Grip® features a spring-loaded cradle that expands/contracts to fit your 7-inch tablet
Rubber-coated tips firmly hold your tablet in place
Easy to access grip knobs enable quick-release of your tablet
Connects using the proven RAM ball-and-socket system allowing for multiple positions
Pole clamp and socket link (5200-201) sold separately.
Constructed of marine-grade stainless-steel components and high-strength composite
Fits most 7-inch tablets with or without sleeves, as well as some smaller tablets
Minimum Width 2.25 in (57 mm)
Maximum Width 5.75 in (146 mm)
Depth 0.875 in (22 mm)
Weighs 0.75 lb (0.34 kg)

Adapts Swiss-style snap-on prisms to 5/8 x 11 tribrach adapter or prism pole
Weighs 0.06 lb (0.03 kg)

3.37 inch (85.6 mm) in Length
2.5 inch (64 mm) Outside Diameter
Steel body
Weighs 1.26 lb (0.57 kg)

Durable removable-tip scribers are perfect for making quick and accurate marks on hard work pieces
Works well on metal, ceramic, concrete, stone, lumber or other surfaces
The scriber features a durable tungsten carbide point that is able to make precise marks to 1/100th of an inch
The magnetic cap quickly cleans up stray metal shavings
Weighs 0.05 lb (0.02 kg)

This Stabilizer helps prevent tripod legs from slipping when used on hard, slick surfaces.

Lightweight and portable
Collapses to  26 3/8″ (67cm)
Opens to a three point star with 26 1/2″ (67cm) legs
Two 0.315″ (8mm) hole in each leg, one at 35CM from center and one at 65cm.
Anodized aluminum legs
O-rings to hold tripod foot in place
Center opening  1 7/8″ (45mm)
Weight  1.05 lbs (0.48kg)

Constructed from anodized aluminum, adapts 5/8 x 11 tripod to 3-1/2 x 8
Weighs 0.65 lb (0.30 kg)

Constructed from anodized aluminum and adapts 5/8 x 11 tripod to 1/4 x 20
Weighs 0.20 lb (0.09 kg)

Constructed from anodized aluminum, this adapts 3-1/2 x 8 tripods to 5/8 x 11
Weighs 0.70 lb (0.32 kg)

For triple prisms and prism targets or tribrachs
Interior Dimensions: 10 x 9.5 x 3 in (25.4 x 24.1 x 7.7 cm)*
Orange
Weighs 1.06 lb (0.48 kg)

This lightweight magnetic mount system adapts easier to curved surfaces
Features a Quick-Release adapter to allow quick setups
Weighs 4.40 lb (2.00 kg)

This lightweight magnetic mount system adapts easier to curved surfaces
Features a 5/8 x 11 adapter allows for quick setups
Weighs 4.15 lb (1.88 kg)

Use for adjusting optical plummet tribrachs & tribrach bubbles
Machined black anodized aluminum
Features a 2-minute bubble
Weighs 1.30 lb (0.59 kg)

The Tri-Max®, designed and manufactured by SECO, is the only surveying grade tripod with certified accuracy
Highly recommended for all servo driven and robotic total stations, 3-D laser scanners or construction lasers
The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use
The large foot is designed specifically for surveyors who have asked for wide, angled tabs to allow even muddy boots to have a secure grip when setting up
The Tri-Max can handle equipment up to 65 lb (30 kg)
Dual Clamp Lock type
Black Hardware, Sealed Hardwood Legs
Length Extended: 71 inches (183 cm)
Length Collapsed: 45 inches (114 cm)
Weight: 19.65 lb (8.9 kg)

The Tri-Max® is the only surveying grade tripod with certified accuracy – highly recommended for all servo driven and robotic total stations, 3-D laser scanners or construction lasers
The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use
Features a 6-5/8-inch Flat head with large center hole (2-5/8 inch) to facilitate an easy set-up over a point
A retaining system which prevents leg kick out and accidental falls on slick surfaces is stored on the inside of the leg and can be left in place when the tripod is not in use
The Tri-Max can handle equipment up to 65 lb (30 kg)
Dual Clamp Lock type
Black Hardware, Fiberglass Legs
Extends 71 in (1.8 m)
Collapses 44.5 in (113 cm)
Weighs 17.00 lb (7.70 kg)

The TopoBoot®, made of black nylon, screws over the precision point and increases the area of the point for use on soft surfaces in topo shots
The Topo-Boot is removable and stores conveniently under the large, easy-to read vial
Weighs 0.05 lb (0.02 kg)

Made from orange polycarbonate with metal inserts and an aluminum yoke
Holds one to three prisms, is compatible with most screw-in prisms, and has a 0 and -30 mm prism offset
Peep sight for pointing the holder, perfect for longer distances
97 mm H.T
Comes with three sealed copper 62 mm prisms in black canisters (#6411-02-BLK)
Weighs 2.70 lb (1.23 kg)

Adjustable 6 inch (152 cm) Black and White tilting target, for affixing to pole top and used in multiple survey jobs.

Contrasting 6″ (152mm) Black and White pattern
Matte non-glare target material
Adjustable tilting axis
Anodized aluminum yoke and target plate
Axis height 135mm
5/8-11 threaded base
Weight 0.90 lbs, 0.41kg

Tilting pivot allows measurement on sloped or flat pipe surfaces
Standard topo shoe length, 3.375-inch (85.7-mm), compatible with all SECO Poles
2-inch (50.8-mm) diameter chrome-plated steel housing with grade-8 ceramic magnet ring
Magnet has 40 pounds of pull force on 3/8-inch (9.5-mm) clean steel plate
Black anodized machined 6061 aluminum body
Machined brass pole connecter with female 5/8 x 11 threads
Weighs 0.55 lb (0.25 kg)