List of products by brand SECO

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
For: Leica Adjustable
Target Height: 86 mm to 125 mm
Weighs 0.34 lb (0.15 kg)

This extremely durable bag is made of polyester 600 denier fabric with a reinforced bottom
It has a pocket for a receiver bracket
A shoulder strap is included for easy and comfortable carrying
Measures: 4 x 71 in (10.16 x 180.34 cm)
Orange
Weighs 0.50 lb (0.23 kg)

Assembly is for 1.25-inch diameter poles
Featuring a 8-minute vial (#D11234)
Includes screws
Weighs 0.14 lb (0.06 kg)

Heavy-Duty Lath Bag with Rhinotek material on the bottom and six inches up the sides
Designed 36 inches (91.4 cm) deep
Orange
Weighs approximately 1.50 lb (0.68 kg)

Aluminum prism pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections
4 ft (1.22 m) in length
1.25 in (32 mm) OD
Red
Weighs 1.30 lb (0.59 kg)

Fiberglass pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections
20 cm in Length
1.25 in (32 mm) Outside Diameter
Weighs 0.34 lb (0.15 kg)

Constructed from anodized aluminum, adapts 5/8 x 11 tripod to 3-1/2 x 8
Weighs 0.65 lb (0.30 kg)

Constructed from anodized aluminum, this adapts 3-1/2 x 8 tripods to 5/8 x 11
Weighs 0.70 lb (0.32 kg)

This case fits most large controllers like the Ranger™ series, Allegro, TSC2™, etc
The case is padded with 0.25 in 1000D Cordura® material with khaki trim
Features a Velcro® flap closure, belt loop and shoulder strap
The main compartment of the case measures 10.25 x 5.25 x 2 in (26 x 13.3 x 5 cm)
The outside pocket is 6 x 5 in (15 x 12.7 cm)
Orange
Weighs 0.35 lb (0.16 kg)

This rotating friction top tribrach adapter allows the prism to be pointed after installation in the tribrach
Fits all tribrachs
Weighs 0.9 lb (0.41 kg)

Designed for vertical triple prism assemblies
Measures: 15 x 8 x 2 in (38.1 x 20.3 x 5.1 cm)*
Orange
Weighs 1.45 lb (0.66 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
Scale width graduated to fill the entire face of the rod,
Measuring scale on the back side that allows for overall height readings
Special molded stand-off ribs protect the scales from wear
Made with strong fiberglass, which is waterproof and corrosion-resistant
CR Rod series is non-conductive
Perfect for laser detector mounting with no special brackets required
Three section rod
Collapsed length is 58.375 inches (1.48 m)
Graduations in inches
Length 13 ft
Weighs 5.00 lb (2.26 kg)

Center Punch Point fits all poles or products with male 5/8 x 11 threads
Hardened steel point will mark all metal and non-metal surfaces
Weighs 0.20 lb (0.09 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
Features a 40-minute Vial and Compass built on to the clamp
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.43 lb (0.19 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
Scale width graduated to fill the entire face of the rod,
Measuring scale on the back side that allows for overall height readings
Special molded stand-off ribs protect the scales from wear
Made with strong fiberglass, which is waterproof and corrosion-resistant
CR Rod series is non-conductive
Perfect for laser detector mounting with no special brackets required
Three section rod
Collapsed length is 58.375 inches (1.48 m)
Graduations in 10ths
Length 13 ft
Weighs 5.00 lb (2.26 kg)

This bracket holds a radio antenna securely to a tripod leg
The heavy-duty bracket makes plumbing the antenna easy
Fits all full-size and heavy-duty tripods and uses a 1/2 inch long, 5/8 x 11 male stud to secure the antenna or extension (tripod sold separately)
It can be used with the SECO Six Foot Snap-Lock Radio Antenna Pole (#5139-02) or any extension with a male/female 5/8 x 11 connection
Weighs 1.55 lb (0.70 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Quick-Release cradles plug directly into Quick-Release pole clamps
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
Features a Compass built on to the clamp
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.38 lb (0.17 kg)

Call to place an order

Silver-coated 25 mm prism in a canister
Weighs 0.06 lb (0.03 kg)

Vests are manufactured to meet ANSI/ISEA Class 2 standards
Features a cool, comfortable mesh back
Includes special compartments for notebooks, pencils, compass, flagging tape, etc
Also includes exterior radio mic clip
100% polyester
Weighs 1.31 lb (0.59 kg)

Carries up to 50 lath or rebar
1000 denier Cordura® bag has a thick, reinforced bottom of leather and the Rhinotek™ abrasive-resistant materials
The exterior features a hammer loop, paint can holder, marker pen slots, and a pocket for miscellaneous gear
Dimensions: 9 x 38 inches (2.54 x 96.52 cm)
Weighs 0.22 lb (0.10 kg)