Accessories

Features dual graduations, an adjustable tip that will adjust to a prism height of 65 mm-to-115 mm
TLV™ Lock
Carbon fiber poles are approximately 30% lighter than similar aluminum poles
Extends 8.53 ft (2.60 m) and collapses to 4.97 ft (1.51 m)
Weighs 2.30 lb (1.05 kg)

The heavy-duty leather sheath is double stitched top grain leather with a belt loop
Options ranging from 10 to 32 OZ

3.37 inch (85.6 mm) aluminum body
Weighs 0.34 lb (0.15 kg

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for standard poles or rods with a 0.75 to 1.25 inch OD
Weighs 0.32 lb (0.14 kg)

This spray can holder is constructed of heavy-duty nylon Cordura® and a nylon webbing belt loop
Holds a paint can on hip for easy and convenient access
Orange
Weighs 0.14 lb (0.06 kg)

Mount a standard survey prism to your SVR or CR Grade Rod
5/8 x 11 thread with 1/4 x 20 stainless tip
Weighs 0.15 lb (0.07 kg)

Convenient for adjusting and calibrating pole vials in the office
The adjusting jig features an ‘L-bracket’ to rest the prism pole point on and the adjustable top piece
Use the adjustable top to center your pole before adjusting the bubble
Weighs 1.00 lb (0.45 kg)

This ‘no-frills’ imported single-section pole is designed to give service in the field at a lower purchase price
Aluminum outer and inner pole
40-minute level vial
Adjustable tip
Dual Grad (0.01 ft/cm)
Hardened steel points
TLV Locking mechanism
Red and White
8.53 ft (2.60 m)
Weighs 2.67 lb (1.21 kg)

Dixon Lumber Crayons last up to 10 times longer than ordinary molded wax crayons.
Fade-proof, water-proof, and smear-proof.
Can be used on wet (green) lumber or dry wood, metal, concrete, and most other surfaces.
Individually UPC coded for easy identification and tracking.
Hexagonal shape (4-1/2 x 1/2 inches) to fit lumber crayon holders.
PMA Certified Non-toxic.
12-count pack

This rubber ball is used as a pin cushion for holding stake tacks
Built-in belt loop

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
For: Leica GPH1
Target Height: 86 mm
Length: 50 mm
Weighs 0.19 lb (0.09 kg)

Holds four rolls of flagging
Includes a belt strap that allows the dispenser to be carried around the waist or over the shoulder
Weighs 0.34 lb (0.15 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
Features a 40-minute Vial and Compass built on to the clamp
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.43 lb (0.19 kg)

This ‘no-frills’ imported two-section pole is designed to give service in the field at a lower purchase price
Aluminum outer and inner pole
40-minute level vial
Adjustable Tip
Dual Grad (0.01 ft/cm)
Hardened steel points
TLV lock mechanism
Red and White
11.81 ft (3.60 m)
Weighs 3.65 lb (1.66 kg)

Adapts Swiss-style snap-on prisms to 5/8 x 11 tribrach adapter or prism pole
Weighs 0.06 lb (0.03 kg)

This bag is heavily padded for single prisms
Measures: 5 x 7 x 2 in (12.7 x 17.8 x 5.1 cm)*
Orange
Weighs 0.48 lb (0.22 kg)

The Claw™ is a new and improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it
Made of durable anodized aluminum for years of trouble-free use in the field
These Quick-Release cradles plug directly in to Quick-Release Pole Clamps
Designed for: TSC3
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.46 lb (0.21 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
Scale width graduated to fill the entire face of the rod,
Measuring scale on the back side that allows for overall height readings
Special molded stand-off ribs protect the scales from wear
Made with strong fiberglass, which is waterproof and corrosion-resistant
CR Rod series is non-conductive
Perfect for laser detector mounting with no special brackets required
Four section rod
Collapsed length is 56.75 inches (1.44 m)
Graduations in 10ths
Length 16 ft
Weighs 6.00 lb (2.72 kg)

This lightweight magnetic mount system adapts easier to curved surfaces
Features a 5/8 x 11 adapter allows for quick setups
Weighs 4.15 lb (1.88 kg)

Radar Technology - Indicates Correct Material For Advanced Precision of Common Objects
Leak Detection - Fast Discovery of Leak
Easy Documenting - Screenshot Feature For Quick & Easy Documentations. Transfer via USB-C & SD Card Slot
Intuitive User Interface - Clear Illustration of Detected Objects w/ Different Object Views
Maximum Wall Thickness: 7.5in