Accessories

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Topcon users with 77 mm prism
Weighs 0.14 lb (0.06 kg)

This extremely durable bag is made of polyester 600 denier fabric with a reinforced bottom
It has a pocket for a receiver bracket
A shoulder strap is included for easy and comfortable carrying
Measures: 4 x 71 in (10.16 x 180.34 cm)
Orange
Weighs 0.50 lb (0.23 kg)

This bracket holds a radio antenna securely to a tripod leg
The heavy-duty bracket makes plumbing the antenna easy
Fits all full-size and heavy-duty tripods and uses a 1/2 inch long, 5/8 x 11 male stud to secure the antenna or extension (tripod sold separately)
It can be used with the SECO Six Foot Snap-Lock Radio Antenna Pole (#5139-02) or any extension with a male/female 5/8 x 11 connection
Weighs 1.55 lb (0.70 kg)

Adjustable 6 inch (152 cm) Black and White tilting target, for affixing to pole top and used in multiple survey jobs.

Contrasting 6″ (152mm) Black and White pattern
Matte non-glare target material
Adjustable tilting axis
Anodized aluminum yoke and target plate
Axis height 135mm
5/8-11 threaded base
Weight 0.90 lbs, 0.41kg

Features 5/8-11 Female to 1/4-20 Male
Weighs 0.17 lb (0.08 kg)

Heavy-Duty Lath Bag with Rhinotek material on the bottom and six inches up the sides
Designed 36 inches (91.4 cm) deep
Orange
Weighs approximately 1.50 lb (0.68 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Quick-Release cradles plug directly into Quick-Release pole clamps
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
Features a Compass built on to the clamp
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.38 lb (0.17 kg)

Any of the Quick Change™ poles can be used for GPS, robotic or total station surveys
Features include SECO TLV™ locking mechanism including a 40-minute vial built in
Aluminum outer pole
Metric graduation (cm) inner pole
Does not come with locking pin
Red and White
Length is 1.33 m – 2.20 m
SECO 6400 Series  (#2090-12) adapter included
Weighs 2.70 lb (1.22 kg)

Ideal for all handheld prism work, topos or precise layout work; it can be assembled in various configurations
This system comes with an adapter so that the prism assembly can be used with a standard 5/8 x 11 (male-threaded) prism poles, for height of 115 mm
Also featuring a 40-minute adjustable vial and white sight cones that provides improved vertical angle pointing
Comes with 0,-30 mm offset position
An orange Cordura® carrying case is included
All anodized aluminum section lengths are known (30 cm)
All aluminum parts are red
Weighs 1.60 lb (0.73 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Users with  SECO, Sokkia, Omni 115 mm prism
Weighs 0.06 lb (0.03 kg)

This case fits most large controllers like the Ranger™ series, Allegro, TSC2™, etc
The case is padded with 0.25 in 1000D Cordura® material with khaki trim
Features a Velcro® flap closure, belt loop and shoulder strap
The main compartment of the case measures 10.25 x 5.25 x 2 in (26 x 13.3 x 5 cm)
The outside pocket is 6 x 5 in (15 x 12.7 cm)
Orange
Weighs 0.35 lb (0.16 kg)

This ‘no-frills’ imported three-section pole is designed to give service in the field at a lower purchase price
Aluminum outer and inner pole
40-minute level vial
Adjustable tip
Dual Grad (0.01 ft/cm)
Hardened steel points
Twist-Lock mechanism
Red and White
15.25 ft (4.65 m)
Weighs 5.38 lb (2.44 kg)

This lightweight magnetic mount system adapts easier to curved surfaces
Features a Quick-Release adapter to allow quick setups
Weighs 4.40 lb (2.00 kg)

This system tilts and slides up and down pin poles
Features a 25 mm, 0 offset silver-coated prism and a high-quality aluminum holder
Site cones double as locks
The prism has a 40-minute adjustable vial
The kit includes four 1-foot (30.5 cm) pole sections each with a 0.50-ft (15.24 cm) mark
Prism includes an adapter so it can be used on any pole or tribrach adapter with 5/8 x 11 threads
A system bag is also included
Weighs 1.40 lb (0.63 kg)

New Claw design for the TSC7/Ranger7 Controller
Also compatible with the TSC3/Ranger3, for those wanting a more heavy-duty claw-clamp solution with more tilt positions on the pole
Made of durable machine-anodized aluminum and stainless steel construction for years of trouble-free use in the field
Includes replaceable silicone pads that hold the controller securely
This new design utilizes SECO’s stronger quick release that we use on heavy tablet pole brackets
Pole Clamp fits all standard 1.25 inch diameter poles
Pole Clamp has six tilt positions from vertical to horizontal of the display

See description for compatibility 

Charges GeoMax and Leica batteries
Input voltage: 100-240V AC
Output voltage: 7.4V DC
Output current: 2.1A
Full Battery charge in 6 Hours

Weatherproof softcover
Durable Field-Flex cover
Rite in the Rain weather-resistant paper
Rulers, conversion charts, and map scale on the cover
112 pages / 56 sheets
Universal page pattern

Features a die-cast aluminum body and an adjustable vial
Fits round or rectangular rods
Suitable for use with track light, robotic instruments, or conventional leveling
The snap-on level fits all poles with a 1 to 1.25 inch diameter
Feature a 40 minute sensitivity
Weighs 0.10 lb (0.04 kg)

For adapting Leica snap-on prisms to 5/8 x 11 tribrach adapter or prism pole
Stainless Steel body
Great for job sites near salt water
Weighs 0.16 lb (0.07 kg)

For triple prisms and prism targets or tribrachs
Interior Dimensions: 10 x 9.5 x 3 in (25.4 x 24.1 x 7.7 cm)*
Orange
Weighs 1.06 lb (0.48 kg)