Accessories

Hardened steel replacement point for most SECO tripods and prism pole points
Weighs 0.06 lb (0.03 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Cradle: Designed for Leica RX Series, C-10/C-15
Weighs 0.35 lb (0.16 kg)

Protects u-LOCATE locator and transmitter from dust, moisture, and impact
Durable and water-resistant fabric
Zippered closure and padded shoulder strap
Separate compartments for locator, transmitter, and accessories
Compatible with u-LOCATE and u-LOCATE+ models

Crain’s Stedi-Rest® fits any 1.25 to 1.5 inch (32 to 38.1 mm) pole and can take the place of three separate products, level Vial Adjustment Jig, Prism Pole Bipod and a Rod Rest
Weighs 0.15 lb (0.07 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Quick-Release cradles plug directly into Quick-Release Pole Clamps
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Small image shows claw attached to cradle. Cradle not included.

Comfortable to wear
Multiple pockets
Weather resistant
Clear panel to control the transmitter without taking it out
Comes with a variety of accessories, such as a shoulder strap, a rain cover, and a tool belt

Features an anodized aluminum body
Easy-to-replace steel point, PN 5194-003
Sharp Point
Weighs 0.16 lb (0.07 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for standard 1.25 inch OD rods and poles
Includes Quick Release and Battery Slot
Weighs 0.46 lb (0.21 kg)

A superior upside-down marking paint designed for survey marking.

Mark will last up to 6 months
Non-freezing
Operational to 14°F (-10°C)
Colors meet standards set by OSHA and APWA/One Call Systems
Container Size: 20 oz.
Net Weight: 17 oz.

Durable and water-resistant
Custom fit for Schonstedt SPOT & GA-52Cx as well as Dunham & Marrow DML2000 Series
Easy to carry and access
Protects your locator from damage

24”x24” Aerial Target: Designed for low to medium-altitude drone mapping, providing a standard reference distance.
Center Eyelet Design: Easily identify the center of the GCP without tearing the target, ideal for precision mapping.
Lightweight & Durable: Weatherproof mesh material, highly visible and matte finish reduces glare.
Software Compatibility: Works with popular photogrammetry reconstruction software, trusted across industries.
Corner Anchor Points: Prevent movement during mapping, allows for repeatable location data.
Trusted & Economical: Used in various industries, cost-effective compared to DIY GCPs.

3.37 inch steel body, steel body
Weighs 0.30 lb (0.14 kg)

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for larger 1.5 inch OD rods and poles
Weighs 0.35 lb (0.16 kg)

Padded interior to protect your MAGGIE Locator from bumps and shocks
Durable exterior to withstand the elements
Custom-fit interior to keep your locator in place
Easy-to-carry handle and shoulder strap

5/8 x 11 Double Female Adapter
Weighs 0.08 lb (0.04 kg)

These Claw™ clamps are also made of durable anodized aluminum
The Claw technology allows maximum tightening on the pole without crushing
The Ball-and-Socket versions allow a handheld data collector to be in more positions
Customize your own solution with these components
The clamps are designed to fit a pole diameter of 1.25 inch (32 mm)
Ball-and-Socket Cradle (1-inch ram ball, designed for 1.25 inch OD poles)
Plain with 1 inch Ball
Weighs 0.31 lb (0.14 kg)

Spacious & Organized: Double-zipped top-loading compartment, side pockets, and front battery pocket for ample storage and organization.
Weather-Resistant Design: Top rain flap, side pocket rain flaps protect equipment from rain and moisture.
Sturdy & Stable: Free-standing aluminum frame keeps the backpack upright, even when fully loaded.
Comfortable & Adjustable: Padded belt, shoulder straps with all-point adjustment, and rubberized carrying handle for a customized and comfortable fit.
Generous Dimensions: Interior dimensions of 17x10x10in, exterior dimensions of 24.5x15x16in, weighing only 8.00lb.
Vibrant Orange Color: High visibility for easy identification in the field.

Durable removable-tip scribers are perfect for making quick and accurate marks on hard work pieces
Works well on metal, ceramic, concrete, stone, lumber or other surfaces
The scriber features a durable tungsten carbide point that is able to make precise marks to 1/100th of an inch
The magnetic cap quickly cleans up stray metal shavings
Weighs 0.05 lb (0.02 kg)

Double Male 5/8 x 11 adapter
Weighs 0.06 lb (0.03 kg)

SECOs Ball-and-Socket X-Grip® features a spring-loaded cradle that expands/contracts to fit your 7-inch tablet
Rubber-coated tips firmly hold your tablet in place
Easy to access grip knobs enable quick-release of your tablet
Connects using the proven RAM ball-and-socket system allowing for multiple positions
Pole clamp and socket link (5200-201) sold separately.
Constructed of marine-grade stainless-steel components and high-strength composite
Fits most 7-inch tablets with or without sleeves, as well as some smaller tablets
Minimum Width 2.25 in (57 mm)
Maximum Width 5.75 in (146 mm)
Depth 0.875 in (22 mm)
Weighs 0.75 lb (0.34 kg)