List of products by brand SECO

Holds four rolls of flagging
Includes a belt strap that allows the dispenser to be carried around the waist or over the shoulder
Weighs 0.34 lb (0.15 kg)

Non-conductive lightweight fiberglass leveling rods
Waterproof and corrosion-proof even against seawater
Unique patented oval shape permits equal size graduations full-length, prevents rod from rolling and is easier to hold
Numeral and graduations are epoxy-protected for maximum wear-resistance and sized for maximum readability
The Level Rod Sections are cushioned with glides to prevent wear
Height measuring gauge on the back side
5/8 x 11 female thread for prism attachment
25 ft length
Graduations 10ths
Includes carrying bag
Weighs 4.8 lb (2.18 kg)

This 5-section aluminum leveling rod are made of a light and durable alloy
The telescopic sections are anodized and silk-screened with moisture-resistant ink
Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side
The rod is 16.4 ft length and uses 10ths graduations
Each rod includes a special level and protective bag
Weighs 3.50 lb (1.60 kg)

Use the SECO Leveling Plate to improve the accuracy of level runs in soft terrain
The Leveling Plates (or Turtles as they are commonly known) are cast heavy steel and red powder painted for durability
Other quality construction features include chrome plating on the dome, carrying handle and ground points
Diameter – 14 cm
Diameter of half ball – 3.0 cm
Height of half ball – 2.0 cm
Height of foot to top of half ball – 6.6 cm
Red
Weighs 4.41 lb (2.00 kg)

This 5-section aluminum leveling rod are made of a light and durable alloy
The telescopic sections are anodized and silk-screened with moisture-resistant ink
Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side
The rod is 16.4 ft length and uses 10ths graduations
Each rod includes a special level and protective bag
Weighs 3.50 lb (1.60 kg)

These aluminum leveling rods are made of a light and durable alloy
The telescopic sections are anodized and silk-screened with moisture-resistant ink
Each rod section uses sturdy polycarbonate buttons that lock each section when extended; the height gauge is on the back side
These rods are 3-Sections and come in 10ths graduations
Length 9 ft
Each rod includes a special level and protective bag
Weighs 2.40 lb (1.10 kg)

Adjustable 6 inch (152 cm) Black and White tilting target, for affixing to pole top and used in multiple survey jobs.

Contrasting 6″ (152mm) Black and White pattern
Matte non-glare target material
Adjustable tilting axis
Anodized aluminum yoke and target plate
Axis height 135mm
5/8-11 threaded base
Weight 0.90 lbs, 0.41kg

Lightweight aluminum scanner sphere
230 mm diameter, accuracy < 2 mm
Painted non-glare white
Female 5/8 x 11 threaded mounting
Center height is 114 mm from bottom flat
Weighs 2.70 lb (1.22 kg)

This 12.2 mm OD pin pole features three sections – each 60 cm long to achieve 1.8 m (5.91 ft); each color section (red or white) is 10 cm long
Weighs 1.95 lb (0.9 kg)

Waterproof M20 universal mounting thread
Tilting holder is anodized aluminum and features an improved locking clamp screw design and an 18-gauge steel target
Can be mounted in either 0 or -30 mm offset positions
Tilting axis height is 115 mm
5.5 x 7 inch Target size
Target Color is Flo Orange with Black
Weighs 1.59 lb (0.72 kg)

Features ‘site cones’ that improve vertical angle pointing — the site cones double as tilting-axis lock knobs
The adjustable 40-min vial is mounted on the front side and is easy to see and simple to adjust
17.5 Nodal Offset
Includes carrying case
Flo Orange
Weighs 0.30 lb (0.14 kg)

Features ‘site cones’ that improve vertical angle pointing — the site cones double as tilting-axis lock knobs
The adjustable 40-min vial is mounted on the front side and is easy to see and simple to adjust
This mini-prism is a zero-offset if you reverse the prism.
Includes carrying case
Flo Orange
Weighs 0.30 lb (0.14 kg)

This 25 mm, copper-coated prism features aluminum double yoke construction w/tilting coaxial target (-30 mm offset)
Two on-board 130-minute vials — top and bottom
Includes replaceable plumb bob point
Flo Orange
Weighs 0.62 lb (0.28 kg)

This 25 mm, copper-coated prism features aluminum double yoke construction w/tilting coaxial target
Two on-board 130-minute vials — top and bottom
Includes replaceable plumb bob point
0 and -30 mm Offset
Flo Yellow
Weighs 0.62 lb (0.28 kg)

Incorporates a simple stainless steel locking mechanism that’s easy to set while adjusting the prism and target tilt
The heavy-duty 62 mm silver-coated prism is sealed in a strong canister with an ‘O’ ring to prevent water and dust from getting inside
The prism can be mounted in either 0 or -30 mm offset positions
Tilting axis height is 115 mm
Target Size is 6 x 9 inch
Target Colors are Flo Orange with Black
Weighs 1.75 lb (0.79 kg)

The Standard Prism Assembly features a copper-coated, canister-type 62 mm prism, simple but proven locking and 5.5 x 7 inch target
It’s waterproof, has a M20 universal mounting thread and the tilting axis height is 115 mm
Prism can be mounted in either 0 or -30 mm offset positions
Target Colors are Flo Orange with Black
Weighs 1.35 lb (0.62 kg)

Made from orange polycarbonate with metal inserts and an aluminum yoke
Holds one to three prisms, is compatible with most screw-in prisms, and has a 0 and -30 mm prism offset
Peep sight for pointing the holder, perfect for longer distances
97 mm H.T
Comes with three sealed copper 62 mm prisms in black canisters (#6411-02-BLK)
Weighs 2.70 lb (1.23 kg)

Here’s a versatile prism system in a small package
The assembly features a 25 mm copper-coated prism, for fog prevention, a tilting holder, with friction axis, zero or -30 mm offset
Powder painted Fluorescent Orange with Fluorescent Yellow targets
Includes a 40-min adjustable circular center-mounted vial
Assembly can mounted on a Prism pole or tribrach at three heights: 70 mm, 100 mm, 115 mm, or can be hand-held using the plumb bob bracket or with S-hook for quick attachment to plumb bob
Also included a point for stake-out work, and a system bag with belt loop
Weighs 0.34 lb (0.15 kg)

Call to place an order

Silver-coated 25 mm prism in a canister
Weighs 0.06 lb (0.03 kg)

The plumb bob point is a replacement part
Fits any of the SECO plumb bobs