List of products by brand SECO

The Thumb-Release Tripod uses the same thumb action release and lock mechanism as the popular Thumb-Release Bipod
1-to-1.5 inch (25.4-to-38.1 mm) outside diameter poles thread easily through the open clamp on top
The legs (independently) extend to 6 ft (1.8 m) and collapse to 43 in (109 cm)
Weighs 6.00 lb (2.60 kg)

The Mini Bipod utilizes the same design concepts as the popular 5217-04 bipod, just shorter
1-to-1.25 inch (25.4-to-31.8 mm) diameter poles attach easily through the open clamp
1.5 inch (3.81 cm) outside diameter poles can be loaded through the top
Collapses to 25 inches (63.5 cm) and extends to 35 inches (88.9 cm)
Flo Yellow

Comes with no-crush bipod head, which prevents crushing of carbon fiber range or prism poles even when excess force is used
A surveyor can set up a freestanding GPS antenna pole or prism pole 1-to-1.25 inch (25.4-to-31.8 mm) outside diameter
Poles attach easily through the open clamp 1.5 inch (3.81 cm) outside diameter
Poles can be loaded through the top Legs (independently) extend to 6 feet (1.8 m) and collapse to 43 inches (109 cm)
Flo Yellow
Weighs 4.25 lb (1.93 kg)

Comes with no-crush bipod head, which prevents crushing of carbon fiber range or prism poles even when excess force is used
A surveyor can set up a freestanding GPS antenna pole or prism pole 1-to-1.25 inch (25.4-to-31.8 mm) outside diameter
Poles attach easily through the open clamp 1.5-inch (3.81 cm) outside diameter
Poles can be loaded through the top Legs (independently) extend to 6 feet (1.8 m) and collapse to 43 inches (109 cm)
Flo Orange
Weighs 4.25 lb (1.93 kg)

Designed for vertical triple prism assemblies
Measures: 15 x 8 x 2 in (38.1 x 20.3 x 5.1 cm)*
Orange
Weighs 1.45 lb (0.66 kg)

This rubber ball is used as a pin cushion for holding stake tacks
Built-in belt loop

Made of heavy-duty water resistant polyester and Rhinotek™
Measures 27 x 11 x 11 inches (69 x 28 x 28 cm)
Orange
Weighs 1.56 lb (0.71 kg)

Holds a tilting prism with tribrach and adapter
Measures: 12 x 12 x 3 in (30.5 x 30.5 x 7.6 cm)*
Orange
Weighs 1.85 lb (0.84 kg)

3.37 inch steel body, steel body
Weighs 0.30 lb (0.14 kg)

Crain’s Stedi-Rest® fits any 1.25 to 1.5 inch (32 to 38.1 mm) pole and can take the place of three separate products, level Vial Adjustment Jig, Prism Pole Bipod and a Rod Rest
Weighs 0.15 lb (0.07 kg)

For adapting Leica snap-on prisms to 5/8 x 11 tribrach adapter or prism pole
Stainless Steel body
Great for job sites near salt water
Weighs 0.16 lb (0.07 kg)

This spray can holder is constructed of heavy-duty nylon Cordura® and a nylon webbing belt loop
Holds a paint can on hip for easy and convenient access
Orange
Weighs 0.14 lb (0.06 kg)

Features a die-cast aluminum body and an adjustable vial
Fits round or rectangular rods
Suitable for use with track light, robotic instruments, or conventional leveling
The snap-on level fits all poles with a 1 to 1.25 inch diameter
Feature a 40 minute sensitivity
Weighs 0.10 lb (0.04 kg)

This system tilts and slides up and down pin poles
Features a 25 mm, 0 offset silver-coated prism and a high-quality aluminum holder
Site cones double as locks
The prism has a 40-minute adjustable vial
The kit includes four 1-foot (30.5 cm) pole sections each with a 0.50-ft (15.24 cm) mark
Prism includes an adapter so it can be used on any pole or tribrach adapter with 5/8 x 11 threads
A system bag is also included
Weighs 1.40 lb (0.63 kg)

This bag is heavily padded for single prisms
Measures: 5 x 7 x 2 in (12.7 x 17.8 x 5.1 cm)*
Orange
Weighs 0.48 lb (0.22 kg)

Magnet has a 3.5 inch diameters
Features a 5/8 x 11 tip
Weighs 1.17 lb (0.53 kg)

This tripod is suitable for any survey instrument use with 5/8 x 11 threads..
Legs have Twist Locks.
Legs are round aluminum.
Legs extend to 25.6 inches (65cm).
Head is flat triangular.
Hardware is black.
Weight is 6.68 pounds (3.03kg

Hardened steel replacement point for most SECO tripods and prism pole points
Weighs 0.06 lb (0.03 kg)

This rotating friction top tribrach adapter allows the prism to be pointed after installation in the tribrach
Fits all tribrachs
Weighs 0.9 lb (0.41 kg)

This adapts retro prisms to Swiss-style tribrach's
Includes a removable Zeiss plug and locking screw
Fits all tribrach's
Weighs 1.75 lb (0.80 kg)