Adapters

BNC-to-BNC Cable: High-quality BNC-to-BNC cables are essential for connecting your TDR Network Analyzer to the cable under test. These cables should be impedance-matched to the cable under test to ensure accurate results.
BNC-to-Alligator Clip Cable: BNC-to-alligator clip cables provide a convenient way to connect your TDR Network Analyzer to test points on the cable under test.
BNC-to-F-type Adapter: BNC-to-F-type adapters allow you to connect your TDR Network Analyzer to coaxial cables with F-type connectors. These adapters are essential for testing coaxial cables.
USBA-USBA Cable: USBA-USBA cables are used to connect your TDR Network Analyzer to a PC. This allows you to transfer data from the TDR to the PC for analysis and reporting.

This rotating friction top tribrach adapter allows the prism to be pointed after installation in the tribrach
Fits all tribrachs
Weighs 0.9 lb (0.41 kg)

This adapts retro prisms to Swiss-style tribrach's
Includes a removable Zeiss plug and locking screw
Fits all tribrach's
Weighs 1.75 lb (0.80 kg)

Adapts Swiss-style snap-on prisms to 5/8 x 11 tribrach adapter or prism pole
Weighs 0.06 lb (0.03 kg)

For adapting Leica snap-on prisms to 5/8 x 11 tribrach adapter or prism pole
Stainless Steel body
Great for job sites near salt water
Weighs 0.16 lb (0.07 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Topcon users with 77 mm prism
Weighs 0.14 lb (0.06 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Leica users w/ 86 mm prism
Weighs 0.11 lb (0.05 kg)

5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms
For Users with  SECO, Sokkia, Omni 115 mm prism
Weighs 0.06 lb (0.03 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
For: Leica GPH1
Target Height: 86 mm
Length: 50 mm
Weighs 0.19 lb (0.09 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
For: Adjustable 5/8 x 11
Target Height: 50 mm to 115 mm
Weighs 0.29 lb (0.13 kg)

Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm
For: Leica Adjustable
Target Height: 86 mm to 125 mm
Weighs 0.34 lb (0.15 kg)

Constructed from anodized aluminum, this adapts 3-1/2 x 8 tripods to 5/8 x 11
Weighs 0.70 lb (0.32 kg)

Constructed from anodized aluminum, adapts 5/8 x 11 tripod to 3-1/2 x 8
Weighs 0.65 lb (0.30 kg)

Features 5/8-11 Female to 1/4-20 Male
Weighs 0.17 lb (0.08 kg)

Constructed from anodized aluminum and adapts 5/8 x 11 tripod to 1/4 x 20
Weighs 0.20 lb (0.09 kg)

This new laser detector adapter turns any Quick Change Pole into a laser grade rod
Use it for digging footings and measuring elevations
Works with the standard detector rod clamp that comes with the detector
The azimuth is adjustable to orient the detector toward the laser so reading the graduations is easy
Machined anodized-aluminum for superior strength and weight concerns
Height: 150 mm
Weighs 0.60 lb (0.27 kg)

Double Male 5/8 x 11 adapter
Weighs 0.06 lb (0.03 kg)

5/8 x 11 Double Female Adapter
Weighs 0.08 lb (0.04 kg)

This anodized aluminum adapter features female 5/8 x 11 threads
Weighs 0.05 lb (0.02 kg)

3.37 inch steel body, steel body
Weighs 0.30 lb (0.14 kg)