5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms For Leica users w/ 86 mm prism Weighs 0.11 lb (0.05 kg)
This new laser detector adapter turns any Quick Change Pole into a laser grade rod Use it for digging footings and measuring elevations Works with the standard detector rod clamp that comes with the detector The azimuth is adjustable to orient the detector toward the laser so reading the graduations is easy Machined anodized-aluminum for superior strength and weight concerns Height: 150 mm Weighs 0.60 lb (0.27 kg)
This rotating friction top tribrach adapter allows the prism to be pointed after installation in the tribrach Fits all tribrachs Weighs 0.9 lb (0.41 kg)
Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm For: Leica Adjustable Target Height: 86 mm to 125 mm Weighs 0.34 lb (0.15 kg)
Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm For: Adjustable 5/8 x 11 Target Height: 50 mm to 115 mm Weighs 0.29 lb (0.13 kg)
For adapting Leica snap-on prisms to 5/8 x 11 tribrach adapter or prism pole Stainless Steel body Great for job sites near salt water Weighs 0.16 lb (0.07 kg)
5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms For Users with SECO, Sokkia, Omni 115 mm prism Weighs 0.06 lb (0.03 kg)
5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° Prisms For Topcon users with 77 mm prism Weighs 0.14 lb (0.06 kg)
Use the Pole Adapter on a SECO Quick Change™ Poles to achieve a target height of 150 mm For: Leica GPH1 Target Height: 86 mm Length: 50 mm Weighs 0.19 lb (0.09 kg)