Tripods

SiteMax Fiberglass Heavy Duty Tripod, with Dual Clamp,Flo-Yellow

High-visibility, heavy-duty composite construction
Weather and fade-resistant
Lightweight and portable (17.8 lb)
Large 6-5/8-inch precision machined flat head
Large 2-3/8-inch tongue-groove strut and legs
Heavy-duty dual clamp design with quick clamp and wing screw
Large foot pad for solid planting
Meets ISO standard (12858-2-H)

The Thumb-Release Tripod uses the same thumb action release and lock mechanism as the popular Thumb-Release Bipod
1-to-1.5 inch (25.4-to-38.1 mm) outside diameter poles thread easily through the open clamp on top
The legs (independently) extend to 6 ft (1.8 m) and collapse to 43 in (109 cm)
Weighs 6.00 lb (2.60 kg)

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs
Features a built-in circular vial in the instrument head and safety chains on the legs to prevent slipping on hard surfaces
The telescopic Aluminum (Round) legs allow for setup to extend 91.2 in (2.32 m)
Featuring a Quick Clamp lock and an Elevator/Round head
Collapses to 4.26 ft (1.26m) 5321-16-BLK
Will fit in tripod carrying bag 8154-12
Black Hardware
Weighs 16.30 lb (7.39 kg)

6-5/8-inch flat head with large center hole (2-5/8-inch) to facilitate an easy set-up over a point
Foot is equipped with a replaceable point made of hardened steel
Dual Locks (Quick Clamp and Screw Clamp)
Standard 5/8 x 11 threaded brass instrument stud
Yellow fiberglass legs, orange aluminum hardware
Snap cap to protect tripod head
Comes with shoulder strap for comfortable carrying over longer distances
Made in North America under strict quality controls
Extends 70.75 inches (179 cm)
Collapses 43.75 inches (111 cm)
Weighs 13.60 lb (6.16 kg)

The Tri-Max® is the only surveying grade tripod with certified accuracy – highly recommended for all servo driven and robotic total stations, 3-D laser scanners or construction lasers
The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use
Features a 6-5/8-inch Flat head with large center hole (2-5/8 inch) to facilitate an easy set-up over a point
A retaining system—which prevents leg kick out and accidental falls on slick surfaces—is stored on the inside of the leg and can be left in place when the tripod is not in use
The Tri-Max can handle equipment up to 65 lb (30 kg)
Screw Clamp Lock type
Black Hardware, Fiberglass Legs
Extends 71 in (1.8 m)
Collapses 44.5 in (113 cm)
Weighs 17.00 lb (7.70 kg)

The Tri-Max® is the only surveying grade tripod with certified accuracy – highly recommended for all servo-driven and robotic total stations, 3-D laser scanners or construction lasers
The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use
A retaining system—which prevents leg kick out and accidental falls on slick surfaces—is stored on the inside of the leg and can be left in place when the tripod is not in use
The large ‘footbed’ is there to facilitate solid planting for stability
The Tri-Max can handle equipment up to 65 lb (30 kg)
Quick Clamp Lock type
Fiberglass Legs, black Hardware
Extends 71 in (1.8 m)
Collapses 44.5 in (113 cm)
Weighs 17.00 lb (7.70 kg)

The Tri-Max®, designed and manufactured by SECO, is the only surveying grade tripod with certified accuracy
Highly recommended for all servo driven and robotic total stations, 3-D laser scanners or construction lasers
The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use
The large foot is designed specifically for surveyors who have asked for wide, angled tabs to allow even muddy boots to have a secure grip when setting up
The Tri-Max can handle equipment up to 65 lb (30 kg)
Dual Clamp Lock type
Black Hardware, Sealed Hardwood Legs
Length Extended: 71 inches (183 cm)
Length Collapsed: 45 inches (114 cm)
Weight: 19.65 lb (8.9 kg)

The Tri-Max® is the only surveying grade tripod with certified accuracy – highly recommended for all servo driven and robotic total stations, 3-D laser scanners or construction lasers
The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use
Features a 6-5/8-inch Flat head with large center hole (2-5/8 inch) to facilitate an easy set-up over a point
A retaining system which prevents leg kick out and accidental falls on slick surfaces is stored on the inside of the leg and can be left in place when the tripod is not in use
The Tri-Max can handle equipment up to 65 lb (30 kg)
Dual Clamp Lock type
Black Hardware, Fiberglass Legs
Extends 71 in (1.8 m)
Collapses 44.5 in (113 cm)
Weighs 17.00 lb (7.70 kg)

Collapsible center staff with a twist-locking mechanism that rotates 360° for calibrating the 8-minute vial
Quick release and twist-locking on the legs
Dual Graduations and adjusts to three heights; 1.5, 1.8 and 2 meters
Collapses to 50in (127cm)
Removable 5/8 x 11 adapter, and an on-board compass
Legs & pole are electro-statically powder painted and include replaceable points
Aluminum hardware is anodized black for long life
Suitable for both GPS and machine control applications
Weighs 15.00lb (6.80kg)
1 year limited manufactures warranty