Tripods

Constructed from anodized aluminum, this adapts 3-1/2 x 8 tripods to 5/8 x 11
Weighs 0.70 lb (0.32 kg)

The Thumb-Release Tripod uses the same thumb action release and lock mechanism as the popular Thumb-Release Bipod
1-to-1.5 inch (25.4-to-38.1 mm) outside diameter poles thread easily through the open clamp on top
The legs (independently) extend to 6 ft (1.8 m) and collapse to 43 in (109 cm)
Weighs 6.00 lb (2.60 kg)

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs
Features a built-in circular vial in the instrument head and safety chains on the legs to prevent slipping on hard surfaces
The telescopic Aluminum (Round) legs allow for setup to extend 91.2 in (2.32 m)
Featuring a Quick Clamp lock and an Elevator/Round head
Collapses to 4.26 ft (1.26m) 5321-16-BLK
Will fit in tripod carrying bag 8154-12
Black Hardware
Weighs 16.30 lb (7.39 kg)

The Tri-Max®, designed and manufactured by SECO, is the only surveying grade tripod with certified accuracy
Highly recommended for all servo driven and robotic total stations, 3-D laser scanners or construction lasers
The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use
The large foot is designed specifically for surveyors who have asked for wide, angled tabs to allow even muddy boots to have a secure grip when setting up
The Tri-Max can handle equipment up to 65 lb (30 kg)
Dual Clamp Lock type
Black Hardware, Sealed Hardwood Legs
Length Extended: 71 inches (183 cm)
Length Collapsed: 45 inches (114 cm)
Weight: 19.65 lb (8.9 kg)

The Tri-Max® is the only surveying grade tripod with certified accuracy – highly recommended for all servo driven and robotic total stations, 3-D laser scanners or construction lasers
The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use
Features a 6-5/8-inch Flat head with large center hole (2-5/8 inch) to facilitate an easy set-up over a point
A retaining system which prevents leg kick out and accidental falls on slick surfaces is stored on the inside of the leg and can be left in place when the tripod is not in use
The Tri-Max can handle equipment up to 65 lb (30 kg)
Dual Clamp Lock type
Black Hardware, Fiberglass Legs
Extends 71 in (1.8 m)
Collapses 44.5 in (113 cm)
Weighs 17.00 lb (7.70 kg)

Constructed from anodized aluminum, adapts 5/8 x 11 tripod to 3-1/2 x 8
Weighs 0.65 lb (0.30 kg)

Combination of hardwood legs with fiberglass dowels provides stability and weather resistance
Large aluminum head and leg hinges provide stable mounting base
Double-banded extension legs and large positive locking quick clamp with large quick release clamps for extra stability
Powder-coated wear-resistant metal hardware
Aluminum shoe with hardened steel replaceable shoe points
Includes: plastic head cap for protection, heavy-duty poly-webbing shoulder strap for ease of carrying to the job site (not shown)
5/8 x 11 threaded post accommodates standard instruments — an ideal tripod for many different applications
Lock type: Quick Clamp
Legs: Birch wood/Fiberglass Hybrid
Extends: 73 inches (1.85 m)
Head: Triangle/Flat
Color: Orange
Weighs 16.20 lb (7.35 kg)

This tripod is suitable for any survey instrument use with 5/8 x 11 threads..
Legs have Twist Locks.
Legs are round aluminum.
Legs extend to 25.6 inches (65cm).
Head is flat triangular.
Hardware is black.
Weight is 6.68 pounds (3.03kg

The Tri-Max® is the only surveying grade tripod with certified accuracy – highly recommended for all servo-driven and robotic total stations, 3-D laser scanners or construction lasers
The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use
A retaining system—which prevents leg kick out and accidental falls on slick surfaces—is stored on the inside of the leg and can be left in place when the tripod is not in use
The large ‘footbed’ is there to facilitate solid planting for stability
The Tri-Max can handle equipment up to 65 lb (30 kg)
Quick Clamp Lock type
Fiberglass Legs, black Hardware
Extends 71 in (1.8 m)
Collapses 44.5 in (113 cm)
Weighs 17.00 lb (7.70 kg)

TRIPOD,ECONO,QUICK CLAMP,ALUM

This Stabilizer helps prevent tripod legs from slipping when used on hard, slick surfaces.

Lightweight and portable
Collapses to  26 3/8″ (67cm)
Opens to a three point star with 26 1/2″ (67cm) legs
Two 0.315″ (8mm) hole in each leg, one at 35CM from center and one at 65cm.
Anodized aluminum legs
O-rings to hold tripod foot in place
Center opening  1 7/8″ (45mm)
Weight  1.05 lbs (0.48kg)

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs
The telescopic Aluminum (Round) legs allow for setup
Extends to 65 in (1.65 m)
Features a Quick Clamp lock type with a Triangle/Flat head
Tripod Hardware comes in Orange
Weighs 9.35 lb (4.25 kg)

The Thumb-Release Tripod uses the same thumb action release and lock mechanism as the popular Thumb-Release Bipod
1-to-1.5 inch (25.4-to-38.1 mm) outside diameter poles thread easily through the open clamp on top
The legs (independently) extend to 6 ft (1.8 m) and collapse to 43 in (109 cm)
Construction Series
Red
Weighs 6.00 lb (2.60 kg)

The Tri-Max® is the only surveying grade tripod with certified accuracy – highly recommended for all servo driven and robotic total stations, 3-D laser scanners or construction lasers
The revolutionary design of this tripod series means this tripod will meet ISO standard (12858-2-H) right out of the box, and after years of field use
Features a 6-5/8-inch Flat head with large center hole (2-5/8 inch) to facilitate an easy set-up over a point
A retaining system—which prevents leg kick out and accidental falls on slick surfaces—is stored on the inside of the leg and can be left in place when the tripod is not in use
The Tri-Max can handle equipment up to 65 lb (30 kg)
Screw Clamp Lock type
Black Hardware, Fiberglass Legs
Extends 71 in (1.8 m)
Collapses 44.5 in (113 cm)
Weighs 17.00 lb (7.70 kg)

Constructed from anodized aluminum and adapts 5/8 x 11 tripod to 1/4 x 20
Weighs 0.20 lb (0.09 kg)

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs
Features a Quick Clamp and a Triangle/Flat head
Tripod Head Size: 12cm, +,-2mm from flat side to opposite corner
The telescopic Aluminum (Round) legs allow for setup to extend to 63.5 in (1.60 m)
Hardware is Black only
Weighs 7.45 lb (3.38 kg)

This tripod is ideal for use with poles under 24 inches long 1-to-1.5 inch (25.4-to-38.1 mm) diameter poles thread easily through the open clamp on top
Legs are a fixed length of 12 inches each
Include stainless steel clamp screw and rubber tips
Weighs 1.30 lb (0.6 kg)

6-5/8-inch flat head with large center hole (2-5/8-inch) to facilitate an easy set-up over a point
Foot is equipped with a replaceable point made of hardened steel
Dual Locks (Quick Clamp and Screw Clamp)
Standard 5/8 x 11 threaded brass instrument stud
Yellow fiberglass legs, orange aluminum hardware
Snap cap to protect tripod head
Comes with shoulder strap for comfortable carrying over longer distances
Made in North America under strict quality controls
Extends 70.75 inches (179 cm)
Collapses 43.75 inches (111 cm)
Weighs 13.60 lb (6.16 kg)

High-visibility, heavy-duty composite construction
Weather and fade-resistant
Lightweight and portable (17.8 lb)
Large 6-5/8-inch precision machined flat head
Large 2-3/8-inch tongue-groove strut and legs
Heavy-duty dual clamp design with quick clamp and wing screw
Large foot pad for solid planting
Meets ISO standard (12858-2-H)

Ideal for Slick Surfaces: The TFG2 tripod floor guide is perfect for setting up tripods on slick surfaces and concrete floors, ensuring stability and preventing slips.
Faster Setup: This floor guide significantly speeds up the process of setting up over a specific point, allowing for efficient and precise positioning.
Heavy-Duty Aluminum Arms: The tripod floor guide features robust aluminum arms with slots that extend and stabilize the tripod legs.
Adjustable Leg Extension: Extend the tripod legs up to 25-3/4" (65cm) from the center, allowing for versatile height adjustments.
Lightweight Design: Weighing only 1.0 lb (0.45kg), the TFG2 tripod floor guide is lightweight and portable, making it easy to carry and transport to different job sites.