Home

Constructed from anodized aluminum, this adapts 3-1/2 x 8 tripods to 5/8 x 11
Weighs 0.70 lb (0.32 kg)

This case fits most large controllers like the Ranger™ series, Allegro, TSC2™, etc
The case is padded with 0.25 in 1000D Cordura® material with khaki trim
Features a Velcro® flap closure, belt loop and shoulder strap
The main compartment of the case measures 10.25 x 5.25 x 2 in (26 x 13.3 x 5 cm)
The outside pocket is 6 x 5 in (15 x 12.7 cm)
Orange
Weighs 0.35 lb (0.16 kg)

This rotating friction top tribrach adapter allows the prism to be pointed after installation in the tribrach
Fits all tribrachs
Weighs 0.9 lb (0.41 kg)

R180 Video
Stonex R180 Robotic Total Station, 1000m, 1", Android

Highly accurate & fast Android robotic station
Rotation speed of 180°/sec & impressively quiet 
Accuracy of 1mm + 1ppm
Range up to 1000m without a prism
6" LCD 720x1280 px touchscreen
8 Core / 8 Thread CPU - 3GB RAM & 32GB ROM
6-hour battery life, 4 hours to charge
Tdrive - Fast360 - APC - Cube•a software

All Stonex Total Stations

Designed for vertical triple prism assemblies
Measures: 15 x 8 x 2 in (38.1 x 20.3 x 5.1 cm)*
Orange
Weighs 1.45 lb (0.66 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
Scale width graduated to fill the entire face of the rod,
Measuring scale on the back side that allows for overall height readings
Special molded stand-off ribs protect the scales from wear
Made with strong fiberglass, which is waterproof and corrosion-resistant
CR Rod series is non-conductive
Perfect for laser detector mounting with no special brackets required
Three section rod
Collapsed length is 58.375 inches (1.48 m)
Graduations in inches
Length 13 ft
Weighs 5.00 lb (2.26 kg)

Center Punch Point fits all poles or products with male 5/8 x 11 threads
Hardened steel point will mark all metal and non-metal surfaces
Weighs 0.20 lb (0.09 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
Features a 40-minute Vial and Compass built on to the clamp
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.43 lb (0.19 kg)

Construction grade leveling (CR) rods offer a rectangular shape with rounded back corners for better gripping
Scale width graduated to fill the entire face of the rod,
Measuring scale on the back side that allows for overall height readings
Special molded stand-off ribs protect the scales from wear
Made with strong fiberglass, which is waterproof and corrosion-resistant
CR Rod series is non-conductive
Perfect for laser detector mounting with no special brackets required
Three section rod
Collapsed length is 58.375 inches (1.48 m)
Graduations in 10ths
Length 13 ft
Weighs 5.00 lb (2.26 kg)

This bracket holds a radio antenna securely to a tripod leg
The heavy-duty bracket makes plumbing the antenna easy
Fits all full-size and heavy-duty tripods and uses a 1/2 inch long, 5/8 x 11 male stud to secure the antenna or extension (tripod sold separately)
It can be used with the SECO Six Foot Snap-Lock Radio Antenna Pole (#5139-02) or any extension with a male/female 5/8 x 11 connection
Weighs 1.55 lb (0.70 kg)

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Quick-Release cradles plug directly into Quick-Release pole clamps
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
Features a Compass built on to the clamp
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.38 lb (0.17 kg)

Call to place an order

Silver-coated 25 mm prism in a canister
Weighs 0.06 lb (0.03 kg)

Vests are manufactured to meet ANSI/ISEA Class 2 standards
Features a cool, comfortable mesh back
Includes special compartments for notebooks, pencils, compass, flagging tape, etc
Also includes exterior radio mic clip
100% polyester
Weighs 1.31 lb (0.59 kg)

Carries up to 50 lath or rebar
1000 denier Cordura® bag has a thick, reinforced bottom of leather and the Rhinotek™ abrasive-resistant materials
The exterior features a hammer loop, paint can holder, marker pen slots, and a pocket for miscellaneous gear
Dimensions: 9 x 38 inches (2.54 x 96.52 cm)
Weighs 0.22 lb (0.10 kg)

This tripod is ideal for use with poles under 24 inches long 1-to-1.5 inch (25.4-to-38.1 mm) diameter poles thread easily through the open clamp on top
Legs are a fixed length of 12 inches each
Include stainless steel clamp screw and rubber tips
Weighs 1.30 lb (0.6 kg)

Comes with no-crush bipod head, which prevents crushing of carbon fiber range or prism poles even when excess force is used
A surveyor can set up a freestanding GPS antenna pole or prism pole 1-to-1.25-inch (25.4-to-31.8 mm) OD
Poles attach easily through the open clamp 1.5 inch (3.81 cm) OD poles can be loaded through the top
The legs (independently) extend to 6 feet (1.8 m) and collapse to 43 inches (109 cm)
Comes with bag and leg clip for easy transport
Construction Series
Weighs 4.25 lb (1.93 kg)

Use for adjusting optical plummet tribrachs & tribrach bubbles
Machined black anodized aluminum
Features a 2-minute bubble
Weighs 1.30 lb (0.59 kg)

This ‘no-frills’ imported two-section pole is designed to give service in the field at a lower purchase price
Aluminum outer and inner pole
40-minute level vial
Adjustable Tip
Dual Grad (0.01 ft/cm)
Hardened steel points
TLV lock mechanism
Red and White
11.81 ft (3.60 m)
Weighs 3.65 lb (1.66 kg)

Combination of hardwood legs with fiberglass dowels provides stability and weather resistance
Large aluminum head and leg hinges provide stable mounting base
Double-banded extension legs and large positive locking quick clamp with large quick release clamps for extra stability
Powder-coated wear-resistant metal hardware
Aluminum shoe with hardened steel replaceable shoe points
Includes: plastic head cap for protection, heavy-duty poly-webbing shoulder strap for ease of carrying to the job site (not shown)
5/8 x 11 threaded post accommodates standard instruments — an ideal tripod for many different applications
Lock type: Quick Clamp
Legs: Birch wood/Fiberglass Hybrid
Extends: 73 inches (1.85 m)
Head: Triangle/Flat
Color: Orange
Weighs 16.20 lb (7.35 kg)

The Thumb-Release Tripod uses the same thumb action release and lock mechanism as the popular Thumb-Release Bipod
1-to-1.5 inch (25.4-to-38.1 mm) outside diameter poles thread easily through the open clamp on top
The legs (independently) extend to 6 ft (1.8 m) and collapse to 43 in (109 cm)
Construction Series
Red
Weighs 6.00 lb (2.60 kg)