Clamp Brackets - Absolute Accuracy Inc.

Brackets

Bracket accessories and attachments for tripods and equipment.

SECO Cradle Claw Bracket - RT3/4 - FC5/6000
In Stock

This SECO bracket holds the FC5000/FC6000 (Topcon), RT3/4 (Carlson) and Mesa 2/3 (Juniper) tablets
The set-up includes a Ball-and-Socket Link and a Claw clamp with 1-inch (25-mm) ram ball
Ball-and-Socket version allows a collector to be in more positions
All ports, connections, and camera are accessible and usable with the bracket attached
Easy “snap in/out” design holds the tablet securely
Made from a single, solid 0.080-inch (2.03-mm) aluminum sheet metal which is powder-coated black
Weighs 0.95 lb (0.43 kg)
$283.38
SECO Stedi-Rest - For Prism Poles
In Stock

Crain’s Stedi-Rest® fits any 1.25 to 1.5 inch (32 to 38.1 mm) pole and can take the place of three separate products, level Vial Adjustment Jig, Prism Pole Bipod and a Rod Rest
Weighs 0.15 lb (0.07 kg)
$12.95
SECO Bipod Leg Clip
In Stock

The bipod leg clip easily attaches to the base of any 1.25 inch O.D. prism or antenna pole
The bipod legs snap into the clip making the system convenient for transport or storage
Weighs 0.04 lb (0.02 kg)
$18.95
SECO Ball and Socket Link
In Stock

Use the Ball-and-Socket Link for your custom solution
Fits the 1-inch ram ball on cradles and clamps
Weighs 0.27 lb (0.12 kg)
$26.23
SECO Radio Antenna Bracket
In Stock

The open clamp attachment allows quick and easy connection to the pole; it connects to 1 to 1.25 inch (25.4 to 31.8 mm) OD poles
The brass male 5/8 x 11 captive stud is easily removed for direct attachment of the radio antenna to the bar
Comes with a non-slip Velcro® cable strap to help manage the radio cable
Can be used with the Radio Antenna Adapter 2133-00 which adapts 1-1/8 x 18 radio antennas to any 5/8 x 11 threaded tip (sold separately)
Weighs 0.22 lb (0.10 kg)
$69.89
SECO Cradle for Leica RX Series, C-10/C-15
In Stock

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Cradle: Designed for Leica RX Series, C-10/C-15
Weighs 0.35 lb (0.16 kg)
$87.57
SECO Claw Pole Clamp Plain
In Stock

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Quick-Release cradles plug directly into Quick-Release Pole Clamps
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Small image shows claw attached to cradle. Cradle not included.
$95.00
SECO Bracket with Battery Slot and Quick Release
In Stock

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for standard 1.25 inch OD rods and poles
Includes Quick Release and Battery Slot
Weighs 0.46 lb (0.21 kg)
$113.87
SECO Bracket with 1.5 inch OD Pole
In Stock

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for larger 1.5 inch OD rods and poles
Weighs 0.35 lb (0.16 kg)
$89.00
SECO Claw Clamp with 1 inch Ball – Plain
In Stock

These Claw™ clamps are also made of durable anodized aluminum
The Claw technology allows maximum tightening on the pole without crushing
The Ball-and-Socket versions allow a handheld data collector to be in more positions
Customize your own solution with these components
The clamps are designed to fit a pole diameter of 1.25 inch (32 mm)
Ball-and-Socket Cradle (1-inch ram ball, designed for 1.25 inch OD poles)
Plain with 1 inch Ball
Weighs 0.31 lb (0.14 kg)
$93.95
SECO X-Grip for 7-inch Tablets
In Stock

SECOs Ball-and-Socket X-Grip® features a spring-loaded cradle that expands/contracts to fit your 7-inch tablet
Rubber-coated tips firmly hold your tablet in place
Easy to access grip knobs enable quick-release of your tablet
Connects using the proven RAM ball-and-socket system allowing for multiple positions
Pole clamp and socket link (5200-201) sold separately.
Constructed of marine-grade stainless-steel components and high-strength composite
Fits most 7-inch tablets with or without sleeves, as well as some smaller tablets
Minimum Width 2.25 in (57 mm)
Maximum Width 5.75 in (146 mm)
Depth 0.875 in (22 mm)
Weighs 0.75 lb (0.34 kg)
$87.57
SECO Bracket Plain
In Stock

The original Open Clamp Pole Bracket and Cradle technology designed by SECO
These products offer a fast and efficient way to mount data collectors or controllers to antenna poles and rover rods
The aluminum open clamp design features a quick-release button and a stainless steel clamp screw that attaches to the pole
Depressing the quick-release button will allow the Claw Quick-Release Cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller
Manufactured from black anodized aluminum
Designed for standard poles or rods with a 0.75 to 1.25 inch OD
Weighs 0.32 lb (0.14 kg)
$99.62
SECO Pole Peg Adjusting Jig
Backordered

Convenient for adjusting and calibrating pole vials in the office
The adjusting jig features an ‘L-bracket’ to rest the prism pole point on and the adjustable top piece
Use the adjustable top to center your pole before adjusting the bubble
Weighs 1.00 lb (0.45 kg)
$104.13
SECO Claw Pole Clamp with Compass and 40-minute Vial
In Stock

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
Features a 40-minute Vial and Compass built on to the clamp
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.43 lb (0.19 kg)
$115.00
SECO Claw Cradle for TSC3
In Stock

The Claw™ is a new and improved clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it
Made of durable anodized aluminum for years of trouble-free use in the field
These Quick-Release cradles plug directly in to Quick-Release Pole Clamps
Designed for: TSC3
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.46 lb (0.21 kg)
$108.80
SECO Radio Antenna Bracket for Tripod
Backordered

This bracket holds a radio antenna securely to a tripod leg
The heavy-duty bracket makes plumbing the antenna easy
Fits all full-size and heavy-duty tripods and uses a 1/2 inch long, 5/8 x 11 male stud to secure the antenna or extension (tripod sold separately)
It can be used with the SECO Six Foot Snap-Lock Radio Antenna Pole (#5139-02) or any extension with a male/female 5/8 x 11 connection
Weighs 1.55 lb (0.70 kg)
$127.66
SECO Claw Pole Clamp with Compass
In Stock

The Claw™ Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole
The clamping function is limited so over-tightening cannot occur
Made of durable anodized aluminum for years of trouble-free use in the field
These clamps are compatible with our existing Quick-Release cradles for most popular data controllers or you can pair it with the Claw Quick-Release Cradle for your collector/controller
Quick-Release cradles plug directly into Quick-Release pole clamps
Designed to fit a pole diameter of 1.25 in (32 mm), however a 1 inch (25.4 mm) pole can be used
Features a Compass built on to the clamp
The Delrin Adapter can be purchased separately to increase the OD of a 1-inch pole to 1.25-inches (#D11145)
Weighs 0.38 lb (0.17 kg)
$117.97
SECO Claw Cradle Assembly for TSC3-TSC7-Ranger7
In Stock

New Claw design for the TSC7/Ranger7 Controller
Also compatible with the TSC3/Ranger3, for those wanting a more heavy-duty claw-clamp solution with more tilt positions on the pole
Made of durable machine-anodized aluminum and stainless steel construction for years of trouble-free use in the field
Includes replaceable silicone pads that hold the controller securely
This new design utilizes SECO’s stronger quick release that we use on heavy tablet pole brackets
Pole Clamp fits all standard 1.25 inch diameter poles
Pole Clamp has six tilt positions from vertical to horizontal of the display
$359.00